In this section:

Related articles:

Use the Crypto Suite Profile - Entry window to specify a set of parameters, referred to as an Entry, within a specified Crypto Suite Profile. On this window, specify the priority for the parameter set (0 - 9) and the crypto-suite. Use the Entry - Session Parameter Flags window to complete specifying the parameters for an Entry. 

To View Entries for a Crypto Suite Profile

On the SBC main screen, go to Configuration > Profile Management > Category: Security Profiles > Crypto Suite Profile > Entry.

Select a profile from the Crypto Suite Profile list. The Entry List for the selected profile opens.

Crypto Suite Profile - Entry

To Create an Entry

To create a new Entry for a selected Crypto Suite Profile:

  1. Click New Entry. The Create New Entry window opens.

  2. Use the following table to configure the parameters and then click Save.

Crypto Suite Profile - Entry Parameters

Parameter Description
Priority Set the priority level for the new entry. The range allowed is 0 to 9. The priority identifies a set of parameters within the Crypto Suite Profile.
Crypto Suite

Specifies the crypto-suite to associate with this entry in the Crypto Suite Profile.

  • AEAD_AES_128_GCM
  • AEAD_AES_256_GCM
  • AES-CM-128-HMAC-SHA1-32
  • AES-CM-128-HMAC-SHA1-80
  • AES_192_CM_HMAC_SHA1_32
  • AES_192_CM_HMAC_SHA1_80
  • AES_256_CM_HMAC_SHA1_32
  • AES_256_CM_HMAC_SHA1_80
  • None

Note: Only AES-CM-128-HMAC-SHA1-80 and AES-CM-128-HMAC-SHA1-32 crypto suites are currently supported for DTLS-SRTP.

To Copy an Entry

To copy an Entry:

  1. Click the radio button next to the Priority for the entry.
  2. Click Copy Entry. The Copy Selected Entry window opens.
  3. Specify a Priority for the Entry and change other parameters as needed. When you copy an Entry you can specify all parameters for the copy, including the flags described on Entry - Session Parameter Flags.

To Edit an Entry

To edit an Entry to change the associated crypto-suite:

  1. Click the radio button next to the Priority for the entry. The Edit Selected Entry window opens.
  2. Select a Crypto Suite and click Save.

To Delete an Entry

To delete an Entry:

  1. Click the radio button next to the Priority for the entry you want to delete.
  2. Click the Delete (X) icon at the end of the row.
  3. Confirm the deletion when prompted.
  • No labels