In this section:

This section helps you to understand the Isub flags for Egress Ip Attributes.

To View and Edit Isub

On SBC main screen, go to Configuration > System Provisioning > Category: Trunk Provisioning > Ip Signaling Profile > Egress Ip Attributes > Isub. The Isub window is displayed.

DEFAULT_H323

On the Isub window, choose the Ip Signaling Profile as DEFAULT_H323 to view the Isub flags for H323 Trunk Group.

Trunk Provisioning - Egress Ip Attributes H323 Isub

There are no Isub flags for DEFAULT_H323 type of Egress Ip Attributes.

DEFAULT_SIP

On the Isub window, choose the Ip Signaling Profile as DEFAULT_SIP to view the Isub flags for SIP Trunk Group.

Trunk Provisioning - Egress Ip Attributes SIP Isub

The following fields are displayed:

Egress Ip Attributes SIP Isub Parameters

Parameter

Description

Allow Nsap IsubEnable to allow NSAP ISUB parameter.
  • disable (default)
  • enable
Allow User Specified IsubAllow user-specified ISUB.
  • disable (default)
  • enable
Include Called Party IsubInclude called party ISUB.
  • disable (default)
  • enable
Include Calling Party IsubInclude calling party ISUB.
  • disable (default)
  • enable

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

 

  • No labels