DO NOT SHARE THESE DOCS WITH CUSTOMERS!
This is an LA release that will only be provided to a select number of PLM-sanctioned customers (PDFs only). Contact PLM for details.
Use the following SMM to configure the SBC Core to interoperate with Net Number CRE and respond to OPTIONS pings locally at the SBC:
Create SMM Profile:
set profiles signaling sipAdaptorProfile test state enabled set profiles signaling sipAdaptorProfile test advancedSMM disabled set profiles signaling sipAdaptorProfile test profileType messageManipulation set profiles signaling sipAdaptorProfile test rule 1 applyMatchHeader one set profiles signaling sipAdaptorProfile test rule 1 criterion 1 type message set profiles signaling sipAdaptorProfile test rule 1 criterion 1 message set profiles signaling sipAdaptorProfile test rule 1 criterion 1 message messageTypes request set profiles signaling sipAdaptorProfile test rule 1 criterion 1 message methodTypes options set profiles signaling sipAdaptorProfile test rule 1 criterion 2 type header set profiles signaling sipAdaptorProfile test rule 1 criterion 2 header set profiles signaling sipAdaptorProfile test rule 1 criterion 2 header name Request-Line set profiles signaling sipAdaptorProfile test rule 1 criterion 2 header condition exist set profiles signaling sipAdaptorProfile test rule 1 criterion 2 header hdrInstance all set profiles signaling sipAdaptorProfile test rule 1 criterion 3 type token set profiles signaling sipAdaptorProfile test rule 1 criterion 3 token set profiles signaling sipAdaptorProfile test rule 1 criterion 3 token condition regex-match set profiles signaling sipAdaptorProfile test rule 1 criterion 3 token tokenType uriusername set profiles signaling sipAdaptorProfile test rule 1 criterion 3 token regexp set profiles signaling sipAdaptorProfile test rule 1 criterion 3 token regexp string test.* set profiles signaling sipAdaptorProfile test rule 1 action 1 type token set profiles signaling sipAdaptorProfile test rule 1 action 1 operation delete set profiles signaling sipAdaptorProfile test rule 1 action 1 to set profiles signaling sipAdaptorProfile test rule 1 action 1 to type token set profiles signaling sipAdaptorProfile test rule 1 action 1 to tokenValue uriusername
Attach the following SMM to the ingress TG as inputAdaptorProfile.
set addressContext default zone ZONE1 sipTrunkGroup TG1 signaling messageManipulation inputAdapterProfile test
Use the following SMM to configure the SBC Core to interoperate with Net Number CRE to populate the trunk context parameter at the SBC.
The SBC always stores and sends the SIP domain information that is used to populate the trunk-context parameter of the Request URI parameter in the INVITE in upper case letters. For example;
INVITE sip:+7317616310006;tgrp=761M52;trunk-context=S.10.711A.M52.STC@10.102.17.22:5060;transport=UDP;user=phone;sat-hops=0 SIP/2.0
The CRE is configured to expect upper case letters for routing based on trunk context.
The figure below describes the routing based on trunk context.