Connecting the Power and Cables

The EdgeMarc 2900aPoE and EdgeMarc 2900ePoE come with an AC power adapter for connecting to an AC outlet.

Caution

Always connect the AC power cord to an AC outlet suitable for the power supply that came with the unit to reduce the risk of damage.

Caution

Secure the AC power cord to a cable management system using a fastener or tie wrap to insure the EdgeMarc does not hang from the AC outlet.

1. If connecting to an Internet router or Internet DMZ switch, connect the Ethernet cable to the WAN Interface port (Port 2) on the EdgeMarc and the other end to the WAN device.

2. Power on the system.

Warning

The equipment has a separate protective earthing terminal on the chassis that must be permanently connected to earth ground to adequately ground the chassis and protect the operator from electrical hazards.

Powering on the EdgeMarc 2900aPoE and EdgeMarc 2900ePoE

1. Turn on the EdgeMarc power switch.
2. Make sure that the power and status LEDs on the front panel are solid green after the EdgeMarc powers on.
3. Proceed to Configuring Basic Network Settings.

  • No labels