You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Not supported by SBC SWe Lite in this release.

In this section:

 

Overview

Linked Signaling Groups support PRI interfaces only; BRI interfaces are not supported.

The Linked Signaling Groups option enables you to link a SIP signaling group to an ISDN signaling group. When the applicable Signaling Group (ISDN or SIP) is "Up" or "Down", the corresponding signaling group goes "Up" or "Down". For example, when a linked ISDN Signaling Group comes "Up" (initial state was "Down"), the corresponding SIP Signaling Group will also change the state to "Up" and send a SIP REGISTER request.

Linked Signaling Groups supports bi-directional control, which indicates a SIP signaling group can control ISDN signaling group(s) and ISDN signaling group(s) can control a SIP signaling group.

Bidirectional Control - Resulting Actions

Signaling Group StatusResulting Action

The SIP Signaling Group in a linked group goes "down"                     

All corresponding ISDN Signaling Group(s) go "down"
The SIP Signaling Group in a linked group comes "up"All corresponding ISDN Signaling Group(s) come "up"
ALL ISDN Signaling Groups in a linked group go "down"Corresponding SIP Signaling Group goes "down"
ALL ISDN Signaling Group(s) in a linked group comes "up"Corresponding SIP Signaling Group come "up"
ANY but not ALL ISDN SIgnaling Group(s) in a linked group go "down" or "up"Corresponding SIP Signaling Group stay "up"

Linked Signaling Groups - Things to Note

  • Any Linked Signaling Group (SIP or ISDN) going "down" because of its corresponding link Signaling Group going down, will also mark the call route entries as "down"; if all destination linked Signaling Group is down, the call route becomes inactive and an alarm is raised.

  • When a linked Signaling Group goes down (SIP/ISDN), the respective alarms are raised, but cleared when the Signaling Group(s) comes back up. See Viewing Alarms and Events.
  • When a SIP Signaling group registers to an external SIP Server and the linked ISDN Signaling Group goes "down", the SIP Signaling Group sends an unREGISTER to the configured SIP server.

Linked Signaling Groups - Limitations

The table below includes the minimum/maximum number of signaling groups (SIP and ISDN) allowed to be configured in a Linked Signaling Group.

Minimum/Maximum Number of Signaling Groups Allowed

ProductSignaling Group TypeMinimum Number Configured in Linked SGsMaximum Number Configured in Linked SGs

SBC 1000

SIP Signaling Group11
ISDN Signaling Group14
SBC 2000SIP Signaling Group11
ISDN Signaling Group110
 

Working with Linked Signaling Groups

  1. In the WebUI, click the Settings tab.

  2. In the left navigation pane, go to Signaling Group Peers.

    Signaling Group Peers Table

To view a Linked Signaling Groups properties:

  1. Click the pop-up icon () next to the entry you want to view.

  2. When you are finished, close the window. 

    To create a Signaling Group peer entry, see Creating and Modifying Linked Signaling Groups.

    Linked Signaling Groups - View Properties

    To delete an entry, select the checkbox next to the entry and then click the Delete () icon.

 

  • No labels