You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

 

Back to Table of Contents

Back to CLI Configure Mode

Back to Profiles - CLI

 

In this section:

JIP is only supported when the 
Unable to show "metadata-from": No such page "_space_variables"
is configured to use an external PSX in the network.

The Jurisdiction Information Parameter (JIP) is a 6-digit field (NPA-NXX format) in an IAM message to indicate the geographic location of the originating caller or switch.

The 

Unable to show "metadata-from": No such page "_space_variables"
platform, when configured, can provide the JIP parameter in SIP INVITE messages for SIP-SIP, SIP-SIP-I and SIP-I to SIP. Additionally, the SBC supports sending JIP in the PAI/FROM/PDCS header, as well as sending JIP across a gateway to the GSX. 

JIP information can be carried in the P-Asserted-ID/FROM and P-DCS-Billing-Info headers of SIP INVITE message and in the PDCS header in a 3xx response. The 

Unable to show "metadata-from": No such page "_space_variables"
records JIP-related details in the Call Detail Record.

Multiple controls can be enabled at a time to select the header or parameter from which JIP value will be extracted. When multiple controls are configured, JIP information is extracted in the following order:

  • RN PARAMETER IN PAI
  • JIP PARAMETER IN PAI
  • RN PARAMETER IN FROM
  • JIP PARAMETER IN PDCS

Command Syntax

% set profiles services sipJipProfile defaultJipProfile 
	jipParameterAs <userInfo | uriParam>
	sendJipIn <rnPAI|jipPAI | rnFROM | jipPDCS>
	useJipFromFROM <disabled | enabled>
	useJipFromPAIjip <disabled | enabled>
	useJipFromPAIrn <disabled | enabled>
	useJipFromPDCS <disabled | enabled>

Command Parameters

Command Parameters

Parameter Name
Length/Range
Description

sipJipProfile

N/A

defaultJipProfile – The default name of the JIP profile associated with ingress and egress SIP Trunk Group used to control the SIP header and the corresponding SIP parameter from which JIP value is extracted or sent.

jipParameterAsN/A

The parameter format to use when sending JIP information.

  • uriParam – P-Asserted-Identity: <sip:+12817267815@198.229.181.6:5060; transport=udp; user=phone;rn=+1123456>
  • userInfo (default) – P-Asserted-Identity: <sip:+12817267815;rn=+1123456@198.229.181.6:5060; transport=udp; user=phone>
sendJipInN/A

Select the header/parameter option to send JIP in INVITE message:

  • rnPAI (default) – SBC sends the JIP value in rn parameter in PAI header.
  • jipPAI – SBC sends the JIP value in jip parameter in PAI header.
  • rnFROM – SBC sends the JIP value in rn parameter in FROM header.
  • jipPDCS – SBC sends the JIP value in jip parameter in PDCS-Billing-Info header.
useJipFromFROMN/A

Enable flag to extract JIP information from "rn" parameter in FROM header of INVITE message.

  • disabled (default)
  • enabled
useJipFromPAIjip

N/A

Enable flag to extract JIP information from "jip" parameter in PAI header of INVITE message.

  • disabled (default)
  • enabled
useJipFromPAIrn

N/A

Enable flag to extract JIP information from "rn" parameter in PAI header of INVITE message.

  • disabled (default)
  • enabled
useJipFromPDCS

N/A

Enable flag to extract JIP information from "jip" parameter in PDCS header of INVITE message.

  • disabled (default)
  • enabled

Command Examples

% set profiles services sipJipProfile sjp2 useJipFromPAIjip enabled sendJipIn rnFROM jipParameterAs uriParam   
% set profiles services sipJipProfile sjp2 useJipFromPAIrn enabled sendJipIn jipPDCS jipParameterAs userInfo 

% show profiles services sipJipProfile sjp2 
useJipFromPAIrn enabled;
sendJipIn       jipPDCS;
jipParameterAs  userInfo;

> show table profiles services sipJipProfile 
                    USE JIP      USE JIP   USE JIP   USE JIP             JIP        
                    FROM         FROM      FROM      FROM      SEND      PARAMETER  
NAME                PAIRN        P AIJIP   FROM      PDCS      JIP IN    AS         
----------------------------------------------------------------------------------
sjp1                disabled     enabled   disabled  disabled  rnFROM    uriParam   
sjp2                enabled      disabled  disabled  disabled  jipPDCS   userInfo   
defaultJipProfile   disabled     disabled  disabled  disabled  rnPAI     userInfo

  • No labels