You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Current »

Accurate System timing is important for the proper operation of the

Unable to show "metadata-from": No such page "_space_variables"
. The system time may be sourced from different places depending upon the specific topology where the
Unable to show "metadata-from": No such page "_space_variables"
 is deployed. In some cases the
Unable to show "metadata-from": No such page "_space_variables"
 itself may serve as a time source for the topology. In such cases, the
Unable to show "metadata-from": No such page "_space_variables"
 may use its own independent internal clock, or it may be synchronized with a network time source through Network Time Protocol (NTP). The NTP source may be a public source such as NTP.org or NIST, or a private source such as an internal enterprise time server.

The

Unable to show "metadata-from": No such page "_space_variables"
 allows you to configure a maximum of two NTP time servers from which to source time and date information.

Configuring the
Unable to show "metadata-from": No such page "_space_variables"
 to Use an NTP Server

To configure your

Unable to show "metadata-from": No such page "_space_variables"
 to use NTP:

  1. In the WebUI, click the Settings tab.

  2. In the left navigation pane, go to System > Node Level Settings.

  3. Configure the fields in Time Management. See  Time Management - Field Definitions.

 

Configure Time Management

 

 

Time Management/Network Time Protocol - Field Definitions

The Time Management panel contains fields that enable you to set the time zone and configure one or more network time sources (NTP).

Use NTP

Specifies whether or not to use NTP as a time source.

NTP Server

Specifies the host name or IP address of the first NTP server. If the hostname is supplied, the

Unable to show "metadata-from": No such page "_space_variables"
uses DNS to connect to the NTP server.

NTP Server Authentication

Specifies whether or not to use authentication when communicating with the NTP server.

NTP Server - MD5 Key ID

Specifies the MD5 Key ID to be used in authenticating the first NTP server. This field is visible only when Enabled is selected for the NTP Server Authentication option.

NTP MD5 Key

Specifies the MD5 key used when authenticating the first NTP Server.

Use NTP Server 2

Specifies whether or not to use a second NTP Server as a time source.

(info) NTP Server 2: The fields used to configure the second NTP server are exactly the same as those used for the first server.

  • No labels