| Parameter | Presence | Type | Default | Description |
---|
| name | M | string | |
The name of this access control list rule.
|
| precedence | M | uint32 | |
The precedence of this access control list rule.
|
| protocol | O | union | any |
The protocol to match or "any" to match any protocol.
|
| ipInterfaceGroup | O | reference | |
The name of a IP interface group to match.
|
| ipInterface | O | reference | |
The name of an IP interface to match.
|
| mgmtIpInterfaceGroup | O | reference | |
The name of a MGMT IP interface group to match.
|
| mgmtIpInterface | O | reference | |
The name of a MGMT IP interface to match.
|
| sourceIpAddress | O | ip-address | 0.0.0.0 |
The source IP address to match.
|
| sourceAddressPrefixLength | O | uint32 | 0 |
The length of source IP address prefix which must match.
|
| destinationIpAddress | O | ip-address | 0.0.0.0 |
The destination IP address prefix to match.
|
| destinationAddressPrefixLength | O | uint32 | 0 |
The length of destination IP address prefix which must match.
|
| sourcePort | O | union | any |
The source port to match.
|
| destinationPort | O | union | any |
The destination port to match.
|
| action | O | enumeration | accept |
The action to take when this rule is matched.
|
| fillRate | O | union | 50 |
The policing fill rate (in pkts/sec) set to 50 pkt/sec as default value i.e
if not mentioned by operator.
|
| bucketSize | O | union | 50 |
The policing bucket size (in pkts). Set to 50 pkt if not specified by operator.
|
| state | O | enumeration | disabled |
Administrative state of the IP access control list rule.
|
| aggregatePolicer | O | string | |
name of aggregate policer associated with.
|
| destTypeIpVersion | O | enumeration | ipV4 |
The IP Address version type when specifying the dest IP address using an interface name or SipSigPort index.
|
| minTTL | O | uint32 | 0 |
The minimum TTL for BFD Support.
|