Show Status OAM

Call CDR configuration.

• earlyAttemptState – Identifies whether early ATTEMPT accounting is enabled or disabled.

• eventAcctMethods – Log event records for the methods specified in the configuration.

• eventAcctPsxInfoState – EVENT records relating to PSX are generated if enabled.

• eventAcctState – EVENT records are generated if enabled.

• generationMode – Identifies the accounting generation mode for the node.
• intermediateAcctInterval – Identifies the Intermediate Accounting Interval in seconds
  NOTE: this object is only applicable when sonusAcctIntAcctMode is set to "interval(1)".
• intermediateAcctMode – Identifies the intermediate record generation mode for the node.
• intermediateAcctState – Identifies whether Intermediate Accounting is Enabled or Disabled for the Node
• intermediateLongDurGenTime – Octet string that identifies the GMT time to generate Telcordia Long Duration accounting records.
• intermediateLongDurThreshold – Identifies the Accounting Intermediate Records Duration in hours.
• intermediateTrapState – Identifies whether a trap will be generated whenever an INTERMEDIATE record is generated.
• maxRecordSequenceNum – Specifies the maximum record sequence number for logging the CDR records.
• populateIpTgFarEndSwitchType – Specifies whether or not Ingress Far End Switch Type is used to passed down from the PSX the IP trunk group for SIP ingress calls.
• populateNonPortedLnpNumbers – Specifies whether or not to populate the Called Number Before Translation field in the accounting record under the following conditions:
  1) for a number for which an LNP lookup was performed
  2) the lookup indicated that the number has not been ported.
• populateRemoteGsxInfoState - Identifies whether a destination SBC propagates its billing data to originating GSX/SBC for GW-GW calls.
• secondStageInheritFirstStage - This indicates whether or not second stage accounting records for two-stage calls inherit fields from the first stage call.
• sendEgressCdrInfoOnReceipt - This indicates whether or not to send the egress CDR info immediately after receiving and processing it.
• startAcctState - Identifies whether Start Accounting is enabled or disabled for the node.

Configuration for external CDR servers.

• admin (not available with 'show status' command)

  • type
  • ipAddress
  • cdrPort
  • useSshKeyFile
  • username
  • password
  • path
  • filePrefix
  • filePostfix
  • connectionTimeout
  • transferTimeout
  • bufferSize
  • status
  • type
  • state
  • progress
  • successfulTransfers
  • failedTransfers
  • pendingTransfers

Configuration for external Radius servers. 

• accountingAdmin
  • failoverPolicy
  • maxErrorRate
  • maxNoResponseTime
  • maxPacketRetryCount
  • maxQueuedPacketsInMemory
  • nasIdentifier
  • nasIpAddress
  • sendNasIdentifier
  • sendNasIpAddress
  • state
• radiusServer
• radiusServerStatus
• radiusUserDetails


This table contains the Ethernet CRC error alarm status, with following fields:

• <interface name>
• currentErrRate
• maxErrRate
• totalCrcErrors
• numAlarmsRaised
• currentAlarmState

This table contains system policer alarm configuration.

• majorAlarmMode
• majorAlarmProfileName 
• minorAlarmMode 
• minorAlarmProfileName

This table contains system policer alarm status. 

• aclAlarmDuration 
• aclAlarmLevel 
• aclDiscardRate 
• aclPacketsAccepted 
• aclPacketsDiscarded 
• aggregateAlarmDuration 
• aggregateAlarmLevel 
• aggregateDiscardRate 
• aggregatePacketsAccepted 
• aggregatePacketsDiscarded 
• arpAlarmDuration 
• arpAlarmLevel 
• arpDiscardRate 
• arpPacketsAccepted 
• arpPacketsDiscarded 
• badEthernetIpHeaderAlarmDuration 
• badEthernetIpHeaderAlarmLevel 
• badEthernetIpHeaderDiscardRate 
• badEthernetIpHeaderPacketsDiscarded 
• discardRuleAlarmDuration 
• discardRuleAlarmLevel 
• discardRuleDiscardRate 
• discardRulePacketsDiscarded 
• ipSecDecryptAlarmDuration 
• ipSecDecryptAlarmLevel 
• ipSecDecryptDiscardRate 
• ipSecDecryptPacketsDiscarded 
• mediaAlarmDuration 
• mediaAlarmLevel 
• mediaDiscardRate 
• mediaPacketsDiscarded 
• rogueMediaAlarmDuration 
• rogueMediaAlarmLevel 
• rogueMediaDiscardRate 
• rogueMediaPacketsDiscarded

• srtpDecryptAlarmDuration

• srtpDecryptAlarmLevel

• srtpDecryptDiscardRate

• srtpDecryptPacketsDiscarded

• uFlowAlarmDuration 
• uFlowAlarmLevel
• uFlowDiscardRate
• uFlowPacketsAccepted
• uFlowPacketsDiscarded

This table contains Media SRTP Authorization error alarm configuration.

This table contains the Media SRTP authorization error alarm status, with following fields:

• <system name>
• currentErrRate
• maxErrRate
• totalSrtpErrors
• numAlarmsRaised
• currentAlarmState

• ceName
• type – event type
• eventClass
• level
• state

Event Log Class Filter status table per card, with following fields: 

• ceName
• type – event type
• eventClass
• eventsFiltered – Number of events filtered for the associated event type and class.

memusage

Platform audit logs configuration.

• state – Administrative state of platform audit logging.

Note: Not availiable for 'show status' command.

Syslog configuration for platform Linux logs, with the fields:

• syslogState 
• servers (table) 
• linuxLogs (table) 

Note: Not available for 'show status' command.

Subsystem Event Logging configuration table, with the fields (not available for 'show status' command):

• ceName
• systemId
• infoLogState
• minEventId
• maxEventId

Event Log status table for status items related to each Event Log type, with following fields:

• type
• currentFile
• fileRecords
• fileBytes
• totalFiles
• totalFileBytes
• filesDropped
• nextRollover
• logDestination
• lastFileDrop
• infoLevelLoggingDisabled
  

LDAP server status details. The following fields are included.

• serverName – LDAP server name
• status – Either available or unavailable
• availableAt – The time when the server is automatically put back into the "available" state.

Current status of the specified user, with following fields:

• name – User name.
• currentStatus – Current status of the user account.
• userId – User ID number.

radiusServer

Displays RADIUS server name of each server. The following field is included.

•  radiusServer – Name of radius server

RADIUS server status details. The following fields are included.

• status –  Either available or unavailable
• availableAt – The time when the server is automatically put back into 'available' state.

radiusServer

RADIUS server status details. The following fields are included.

• serverNameId – RADIUS server name
• status – Either available or unavailable
• availableAt – The time when the server is automatically put back into 'available' state.

 RADIUS server Retry criteria settings. The following fields are included.

• retryTimer – Time in milliseconds before the SBC attempts another authentication request.
• retryCount – Number of retries the SBC uses to attempt authentication.
• oosDuration – Time in minutes the RADIUS server remains out of service after a timeout.

This table contains SNMP community information.

This table contains SNMP community strings used in a SNMP request, with following fields:

• snmpCommunityIndex
• snmpCommunityName

localEngineId

SNMPv3 SNMP-USER-BASED-SM-MIB usmUserEngineID and SNMP-COMMUNITY-MIB snmpCommunityContextEngineID

securityLevel

SNMPv3 SNMP-VIEW-BASED-ACM-MIB vacmAccessSecurityLevel for all users in model 0 and 3.

trapTarget

Trap target configuration details, with following fields:

• name
• fqdn
• ipAddress
• port
• trapType
• targetUsername
• targetSecurityLevel
• state

Auth key and Priv key details for each user, with following fields:

• username
• group
• authProtocol
• authKey
• privProtocol
• privKey

SNMP version currently supported.

The sonusTrapTable identifies the SNMP notifications that this node supports.

• <trap name>

• priorityLevel – Lists any user-defined priority levels overriding the default pre-compiled level.

• state – Determines if this SNMP trap is transmitted to any management client.

DSP resource usage trap configuration.

• callFailureTrap lackdsp– Trap configuration for Call Failure due to no DSP.

  • interval – Indicates the time interval for the threshold of call failure due to lack of DSP pad.

  • threshold – Indicates the number of call failure due to lack of DSP pad threshold.

• dspAvailabilityTrap– DSP Availability trap threshold configuration.

  • allThreshold – Indicates the percentage DSP Availability threshold for all types.

  • g711PacketThreshold – Indicates the percentage of G711 Packet type DSP Availability threshold.

  • g726Threshold – Indicates the percentage of G726 type DSP Availability threshold.

  • g729Threshold – Indicates the percentage of G729 type DSP Availability threshold.