System - Security - SWe Traffic Profiles

In this Section:

To View Swe Traffic Profile

On SBC main screen, go to System > Security >Swe Traffic Profiles. The Swe Traffic Profiles window is displayed.

SWe Traffic Profile

The parameters displayed are:

Swe Traffic Profile Parameters

Parameter	Description
`Name`	SWe Traffic Profile name.
`Call Hold Time`	Average Call Hold Time of the call load.
`Access Scenario`	If true, deployment is in access scenario.
`Bhca Per Subscriber`	BHCA per subscriber.
`Registration Interval`	Registration Interval in seconds.
`NAT Enabled`	The status of NAT configuration.
`Registration Refresh Interval`	Refresh Interval in seconds.
`Direct Media Percent`	The percentage of call load that is Direct Media.
`Transcode Percent`	The percentage of call load that is transcoded call.
`Passthrough Codec Profile`	The name of the pass-through codec profile.
`Transcoding Codec Profile`	The name of the transcoding codec profile.
`Crypto Percent`	The crypto percentage refers to the number of legs that are encrypted.
`Tone Percent`	The number of legs that get tones treatment.
`Max VMbandwidth`	The maximum VM bandwidth in Gbps.
`Processor Capability Index Override`	If true, index overriding is disabled and the the value for the field `Processor Capability Index Override Value` can be entered.
`Processor Capability Index Override Value`	The value of `Processor Capability Index Override Value` field.