You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Back to Table of Contents

Back to Configuration

Back to Configuration - Profile Management

Back to Profile Management - Digit Profile

Specifies the parameters associated with Mfr1Generate.

To View and Edit Mfr1Generate

On SBC main screen, go to Configuration > Profile Management > Category: Digit Profiles > Digit Profiles > Mfr1Generate.

Select the desired Digit Profile from the drop-down list to view its respective Mfr1Generate parameters.

The Mfr1Generate window is displayed.

Profile Management - Digit Profiles - Mfr1Generate

The following fields are displayed:

Dtmf Mfr1Generate Parameters

Parameter Description
PowerDigit generation power level in dBm (range: -50 to -3 / default = -7).
MakeDuration (in milliseconds) of generated digits (range: 0-8000 / default = 65).
BreakSilence duration (in milliseconds) between generated digits (range: 0-8000 / default = 65).
Make KpDuration (in milliseconds) of generated KP digits. (range: 0-8000 / default = 105).

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

 

  • No labels