Specifies the NFCI Default values.

To View and Edit Nfci Default Values

On SBC main screen, go to Configuration > Profile Management > Category: Signaling Profiles > Signaling Profile > Egress > Uk Isup > Nfci Default Values.

Select the desired Signaling Profile from the drop-down list to view its respective Nfci Default Values parameters.

The Nfci Default Values window is displayed.

Signaling Profiles - Signaling Profile - Egrees - Nfci Default Values

The following fields are displayed:

Signaling Profile - Egress - Nfci Default Values parameters

Parameter Description
Cli Blocking Available

When interworking a non-UK ISUP variant to UK ISUP- If selected, the CLI Blocking Available bit is set in the NFCI (National Forward Call Indicators) parameter of the outgoing UK ISUP IAM. For a UK ISUP to UK ISUP route? If selected, the CLI Blocking Available bit is set in the NFCI parameter of the outgoing UK ISUP IAM. The options are:

  • disable (default)
  • enable

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

 

  • No labels