In this section:
Specifies the details about the Message policer.
On SBC main screen, go to Configuration > System Provisioning > Security Configuration > Sip Cac Profile > Message.
Select the desired Sip Cac Profile from the drop-down list to view its respective Message parameters.
The Message window is displayed.
Security Configuration - Sip Cac Profile - Message
The following fields are displayed:
Message Parameters
Parameter | Description |
---|---|
| Specifies the preference for MESSAGE within the ingress aggregate policer. The value range from 1 - 10. The default value is 1. |
| Specifies the maximum burst size for ingress MESSAGEs. The value range from 1 - 10000. The default value is 1. |
| Specifies the maximum ingress MESSAGE rate in aggregate messages per period. The value range from 1 - 1000 or |
| Specifies the time period (in seconds) over which ingress MESSAGE rate applies. The value range from 1 - 10 seconds. The default value is 1 second. |
| Specifies the preference for MESSAGE within the egress aggregate policer. The value range from 1 - 10. The default value is 1. |
| Specifies the maximum burst size for egress MESSAGE. The value range from 1 - 1000. The default value is 1. |
| Specifies the maximum egress MESSAGE rate in aggregate messages per period. The value range from 1 - 1000 or |
| Specifies the time period (in seconds) over which egress MESSAGE rate applies. The value range from 1 - 10 seconds. The default value is 1 second. |
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.