In this section:
Use the IKE Protection Profile window to configure IKE Protection Profiles by establishing an encryption algorithm, the maximum SA lifetime, and other SA conditions, for an IKE peer. These properties are linked to each IKE peer that is provisioned with this profile. On the SBC main screen, go to Configuration > Profile Management > Category: Security Profiles > IKE Protection Profile. The IKE Protection Profile window is displayed. To create a new IKE Protection Profile, click New Ike Protection Profile. The Create New IKE Protection Profile window opens. Parameter Length/Range Description Name Up to 23 characters The name of the IKE Protection Profile. SA Lifetime 1200-1000000 The SA Lifetime setting, in seconds. This is the maximum interval that any one Security Association will be maintained before possible re-keying. The default is 28,800 seconds (Corresponds to 8 hours). This parameter applies to the IKE SA when it appears in the IKE Protection Profile and to the IPsec SA when it appears in the IPsec Protection Profile. Dpd Interval 10-3600, or The IKE Protection Profile Dead Peer Detection test interval period in seconds. The value '0' corresponds to DPD disabled. The default is 30. Enable flag to require PFS use during IPSec SA negotiation. To edit an IKE Protection Profile: To copy an IKE Protection Profile: To delete an IKE Protection Profile:To View IKE Protection Profiles
To Create an IKE Protection Profile
TimePfs Required To Edit IKE Protection Profiles
To Copy an IKE Protection Profile
To Delete an IKE Protection Profile