Use the Hard Disk Status window to view the status of the hard disk in the server.
Note

If the health test fails or life remaining threshold is reached, the drive may be faulty. Run diagnostics and replace the drive, if needed.


On the SBC main screen, go to Troubleshooting > Troubleshooting Tools > System Status and Usage > Hard Disk Status or
Monitoring > System > Category: Hardware Status > Hard Disk > Hard Disk Status or
All > SystemHard Disk Status

The Hard Disk Status window is displayed.

Figure 1: Hard Disk Status

The following output is displayed:

Table 1: Hard Disk Status Parameters

Parameter

Description

Server Name

Name of the server.

Disk Number

Indicated the hard disk number (typically 0 through 3).

Present

Indicates if the hard disk exists.

Product ID

Indicates the product ID of the hard disk as assigned by the vendor.

Revision

Revision of the hard disk as assigned by the vendor.

Capacity

Indicates the capacity of the disk.

Disk Status

Indicates if the disk is online/failed.

Health Test

Specifies the overall health of the device

Disk Life Remaining

Specifies a calculated percentage estimating the life remaining of the device or N/A if not supported by the device.

 

 

  • No labels