EdgeMarc 2900aPoE Front Panel


When lit, the Power LED indicates power is applied to the system. The Status LED changes to indicate the current state of the system. 

EdgeMarc 2900aPoE LEDs

LEDIndicatorDescription
PowerOffPower is not supplied to the device.
Troubleshoot by verifying that the power adapter is connected to the unit and that power is supplied to the AC wall outlet.

Solid
Green		Power is supplied to the unit.
StatusOffPower is not supplied to the device, or the bootloader failed to load.

Solid
Amber		The device is running a self-test and is initializing.

Flashing
Amber		The device is upgrading its software.

Flashing
Green
The device is loading the EdgeMarc VoIP Operation System (VOS).

Solid
Green		VOS is ready.

Red

The device is in the bootloader.
The kernel will change the LED to solid amber once the kernel starts loading.

LineOffPSTN line is not in use.

Solid
Green		PSTN line is in use.
PhoneOffPhone is in the on-hook state.

Solid
Green		Phone is in the off-hook state.
Fiber
Link/Access		Solid
Green		Peer link is powered.

Flashing
LED		Fiber traffic is active.

EdgeMarc 2900aPoE Front Panel Components

Physical
Label/Type		FunctionDescription
Erase buttonErasePress the Erase button in quick succession to control the following:
  • One click—No action.
  • Two clicks—Resets the CLI password with no service interruption.
  • Three clicks—Restores to factory default settings and reboots the system.
Note: When restored to factory default settings, the current configuration is lost, disconnecting all VoIP devices, Internet connectivity, and network access for computers until the system is reconfigured.
Power/Status
LEDs		System power
and status		Refer to EdgeMarc 2900aPoE LEDs for system and power status details.
Ethernet WAN
Ports 1-2		WAN2x1 10/100/1000 Mbps RJ-45 Ethernet ports for WAN network connectivity (Copper).
SFP Link LEDsStatusWhen lit, the SFP port is active and the copper RJ-45 port is inactive.
Refer to EdgeMarc 2900aPoE LEDs.
Optical WAN
SFP Ports 1-2		WANSmall Form-Factor Pluggable (SFP) for fiber connectivity.
Either the SFP port (operating at 100/1000 Mbps) or the RJ-45 (operating at 10/100/1000 Mbps) port can be active at a time.
Micro SD Card
Interface		Storage
Allows the EdgeMarc to save configurations and other files to an SD High Capacity (SDHC) Version 2.0 card.
Maximum storage capacity is 32 GB per SD card, 4 GB per file. The SD card capabilities are configured with the web-based configuration menu and with command-line interface (CLI).
Refer to EdgeMarc 2900 Series MicroSD Card Features and Specifications.
Management
Console Port		ManagementRJ-45 serial craft port for console management.
This port is used for debug or diagnostic purposes only. Primary system configuration is performed from a web browser as described in the EdgeMarc User Guide .
Line Ports 1-2FXO2 x RJ-11 ports for 2 FXO channels.
Phone Ports 1-6FXS6 x RJ-11 ports for 6 FXS channels.
FXO/FXS LEDsStatusRefer to EdgeMarc 2900aPoE LEDs for FXO/FXS LED status details.
Ethernet LAN
PoE Ports 1-12		LAN with PoE2x6 10/100/1000 Mbps RJ-45 Ethernet ports for LAN network connectivity with PoE.
PoE LEDsStatusWhen lit, the corresponding LAN PoE Port is active.