This section describes Intelligent Network Application Protocol Gateway (INAPGW) TL1 commands.
INAPGW Command Groupings
The following figure shows the INAPGW objects that can be configured using TL1 commands.
This section includes information for the INAPGW command set.
INAPGW Configuration
CHG-INAPGW-CFG
CHG-INAPGW-CFG:::[CTAG]:::::[E164_INAPGW=<string>],[TIMEOUT=<int>],[ERRORS=<LogBoolean>],[SETUPMGMT=<LogBoolean>],[EXECTRACE=<LogBoolean>],[DISTMGMT=<LogBoolean>];
SET-INAPGW-CFG:
SET-INAPGW-CFG:::[CTAG]:::[ACTIVATE/DEACTIVATE/RESTORE_DBG];
VFY-INAPGW-CFG
VFY-INAPGW-CFG:::[CTAG]::::::[<searchedAttrKey1=Value1>][,<searchedAttrKey2=Value2>]…[,<searchedAttrKeyN=ValueN>];
:::<LIC=INAPGWLicense>,<TRAFFIC_STATUS=INAPGWConnStatus>,<E164_INAPGW=string>,<TIMEOUT=int>,<ERRORS=LogBoolean>,<SETUPMGMT=LogBoolean>,<EXECTRACE=LogBoolean>,<DISTMGMT=LogBoolean>;
Attribute Details
LIC - INAPGW License
Permissions: Read-only
Type: INAPGWLicense={UNLICENSED,LICENSED}
Description: INAP Gateway feature license (UNLICENSED/LICENSED). If the INAP Gateway is unlicensed, the SS7 traffic cannot be activated.
TRAFFIC_STATUS - Traffic Status
Permissions: Read-only
Type: INAPGWConnStatus={INACTIVE,NOT CONNECTED,CONNECTED}
Description: SCCP connectivity status (INACTIVE, NOT CONNECTED, CONNECTED). Based on the per NA connectivity status. CONNECTED will be displayed as soon as an SCCP NA on any slot is connected. Associated to alarm 1301 (INAPGW SS7 Down).
E164_INAPGW - E164 INAPGW
Permissions: Writeable
Type: string
Description: INAP Gateway E.164 number. Must be unique on each mate-STP. The generated INAP Initial-DP query will include these digits in the SCCP Calling Party Address parameter. Must be defined to activate traffic.
TIMEOUT - Transaction Timeout
Permissions: Writeable
Type: int(Range: [1..10])
Description: INAPGW Transaction Timeout (1 to 10). Pending transaction timeout for the INAP queries in seconds. Default: 2 seconds.
ERRORS - Errors
Permissions: Writeable
Type: LogBoolean={NOT LOGGED,LOGGED}
Description: If set to LOGGED, the system logs to debug all INAPGW errors. Should be set to LOGGED for live systems.
SETUPMGMT - Setup Management
Permissions: Writeable
Type: LogBoolean={NOT LOGGED,LOGGED}
Description: If set to LOGGED, the system logs to debug the INAPGW setup information. Should be set to LOGGED for live systems.
EXECTRACE - Execution Trace
Permissions: Writeable
Type: LogBoolean={NOT LOGGED,LOGGED}
Description: If set to LOGGED, the system logs to debug the execution trace during the processing of incoming INAPGW traffic. Must be set to NOT LOGGED for live systems.
DISTMGMT - Distribution Management
Permissions: Writeable
Type: LogBoolean={NOT LOGGED,LOGGED}
Description: If set to LOGGED, the system logs to debug the INAPGW distribution information. Must be set to NOT LOGGED for live systems.
(INAPGW) SCCP NA
DLT-INAPGW-SCCPNA
DLT-INAPGW-SCCPNA::[<SCCP NA/NA>]:[CTAG];
ADD-INAPGW-SCCPNA
ADD-INAPGW-SCCPNA::[<SCCP NA/NA>]:[CTAG];
SET-INAPGW-SCCPNA
SET-INAPGW-SCCPNA::[<SCCP NA/NA>]:[CTAG]:::[ACTIVATE/DEACTIVATE];
VFY-INAPGW-SCCPNA
VFY-INAPGW-SCCPNA::[<SCCP NA/NA>]:[CTAG]::::::[<searchedAttrKey1=Value1>][,<searchedAttrKey2=Value2>]…[,<searchedAttrKeyN=ValueN>];
::[<SCCP NA/NA>]:<NA=int>,<STATUS=INAPGWConnStatus>;
AID Description
NA - Position 1
Type: int(Range: [1..99])
Description: SCCP Network Appearance
Attribute Details
NA - NA
Permissions: Createable
Type: int(Range: [1..99])
Description: SCCP Network Appearance
STATUS - Status
Permissions: Read-only
Type: INAPGWConnStatus={INACTIVE,NOT CONNECTED,CONNECTED}
Description: SCCP NA connectivity status (INACTIVE, NOT CONNECTED, CONNECTED). Based on the per NA connection connectivity status. CONNECTED will be displayed as soon as an SCCP NA connection is connected. Associated to alarm 1303 (INAPGW SCCP NA Down).
(INAPGW) SCCP NA Connection
VFY-INAPGW-SCCPCONN
VFY-INAPGW-SCCPCONN::[<SCCP NA/NA>]-[<SCCP NA Connection/Slot>]:[CTAG]::::::[<searchedAttrKey1=Value1>][,<searchedAttrKey2=Value2>]…[,<searchedAttrKeyN=ValueN>];
::[<SCCP NA/NA>]-[<SCCP NA Connection/Slot>]:<SLOT=int>,<STATUS=INAPGWConnStatus>;
AID Description
Slot - Position 1
Type: int
Description: Associated slot of the routing CPU for this SCCP NA connection.
Attribute Details
SLOT - Slot
Permissions: Createable
Type: int
Description: Associated slot of the routing CPU for this SCCP NA connection.
STATUS - Status
Permissions: Read-only
Type: INAPGWConnStatus={INACTIVE,NOT CONNECTED,CONNECTED}
Description: SCCP connectivity status (INACTIVE, NOT CONNECTED, CONNECTED). Based on the per slot connectivity status. CONNECTED will be displayed as soon as an SCCP connection on any slot is connected. Associated to alarm 1305 (INAPGW SCCP NA Connection Down).
(INAPGW) SCCP PC-SSN Registration
VFY-INAPGW-SCCPPCSSN
VFY-INAPGW-SCCPPCSSN::[<SCCP PCSSN Registration/NA>-<SCCP PCSSN Registration/PC>-<SCCP PCSSN Registration/SSN>]:[CTAG]::::::[<searchedAttrKey1=Value1>][,<searchedAttrKey2=Value2>]…[,<searchedAttrKeyN=ValueN>];
::[<SCCP PCSSN Registration/NA>-<SCCP PCSSN Registration/PC>-<SCCP PCSSN Registration/SSN>]:<NA=int>,<PC=pointcode>,<SSN=int>,<STATUS=INAPGWRegStatus>;
AID Description
NA - Position 1
Type: int
Description: Network Appearance of the INAPGW SCCP service registration
PC - Position 2
Type: pointcode
Description: Point code of the INAPGW SCCP service registration.
SSN - Position 3
Type: int(Range: [2..255])
Description: Subsystem number of the INAPGW SCCP service registration (2 to 255). Some standard SSN as per latest specifications Q.0713 (ITU) and GR-246 (ANSI) include: 5 (MAP), 6 (HLR), 7 (VLR), 8 (MSC).
Attribute Details
NA - NA
Permissions: Read-only
Type: int
Description: Network Appearance of the INAPGW SCCP service registration
PC - PC
Permissions: Read-only
Type: pointcode
Description: Point code of the INAPGW SCCP service registration.
SSN - SSN
Permissions: Read-only
Type: int(Range: [2..255])
Description: Subsystem number of the INAPGW SCCP service registration (2 to 255). Some standard SSN as per latest specifications Q.0713 (ITU) and GR-246 (ANSI) include: 5 (MAP), 6 (HLR), 7 (VLR), 8 (MSC).
STATUS - Status
Permissions: Read-only
Type: INAPGWRegStatus={NOT REGISTERED,PARTIALLY REGISTERED,REGISTERED}
Description: Status of the PC-SSN registration. Fully registered when all SCCP connections have successfully registered the PC-SSN. Valid values: NOT REGISTERED, PARTIALLY REGISTERED, REGISTERED.
(INAPGW) SCCP AppID Registration
VFY-INAPGW-SCCPAPPID
VFY-INAPGW-SCCPAPPID::[<SCCP AppID Registration/NA>-<SCCP AppID Registration/Application ID>]:[CTAG]::::::[<searchedAttrKey1=Value1>][,<searchedAttrKey2=Value2>]…[,<searchedAttrKeyN=ValueN>];
::[<SCCP AppID Registration/NA>-<SCCP AppID Registration/Application ID>]:<NA=int>,<APPID=string>,<STATUS=INAPGWRegStatus>;
AID Description
NA - Position 1
Type: int
Description: Network Appearance of the INAPGW SCCP service registration
Application ID - Position 2
Type: string
Description: Application ID of the INAPGW SCCP service registration. Associated with the GWST redirection feature. Valid values: alphanumeric string with - and _ with a maximum of 16 characters (including the null terminating character).
Attribute Details
NA - NA
Permissions: Read-only
Type: int
Description: Network Appearance of the INAPGW SCCP service registration
APPID - Application ID
Permissions: Read-only
Type: string
Description: Application ID of the INAPGW SCCP service registration. Associated with the GWST redirection feature. Valid values: alphanumeric string with - and _ with a maximum of 16 characters (including the null terminating character).
STATUS - Status
Permissions: Read-only
Type: INAPGWRegStatus={NOT REGISTERED,PARTIALLY REGISTERED,REGISTERED}
Description: Status of the Application ID registration. Fully registered when all SCCP connections have successfully registered the Application ID. Valid values: NOT REGISTERED, PARTIALLY REGISTERED, REGISTERED.
External NP Partner
DLT-INAPGW-EXT_NP
DLT-INAPGW-EXT_NP::[<External NP Partner/Application ID>]:[CTAG];
ADD-INAPGW-EXT_NP
ADD-INAPGW-EXT_NP::[<External NP Partner/Application ID>]:[CTAG]:::::[NA=<int>],[EXTNP_E164=<string>],[SSN=<SCCPSSN>],[E164_CLG=<string>],[INAP_CTN_PREFIX=<string>];
CHG-INAPGW-EXT_NP
CHG-INAPGW-EXT_NP::[<External NP Partner/Application ID>]:[CTAG]:::::[NA=<int>],[EXTNP_E164=<string>],[SSN=<SCCPSSN>],[APPCTXT=<string>],[SERVICE_KEY=<ServiceKey>],[E164_CLG=<string>],[EDP=<FeatureBoolean>],[INAP_CTN_PREFIX=<string>];
VFY-INAPGW-EXT_NP
VFY-INAPGW-EXT_NP::[<External NP Partner/Application ID>]:[CTAG]::::::[<searchedAttrKey1=Value1>][,<searchedAttrKey2=Value2>]…[,<searchedAttrKeyN=ValueN>];
::[<External NP Partner/Application ID>]:<APPID=string>,<NA=int>,<EXTNP_E164=string>,<SSN=SCCPSSN>,<APPCTXT=string>,<SERVICE_KEY=ServiceKey>,<E164_CLG=string>,<EDP=FeatureBoolean>,<INAP_CTN_PREFIX=string>;
AID Description
Application ID - Position 1
Type: string
Description: Application ID representing the External NP Partner. Associated with the GWST redirection feature. Valid values: alphanumeric string with - and _ with a maximum of 16 characters.
Attribute Details
APPID - Application ID
Permissions: Createable
Type: string
Description: Application ID representing the External NP Partner. Associated with the GWST redirection feature. Valid values: alphanumeric string with - and _ with a maximum of 16 characters.
NA - NA
Permissions: Writeable and Createable
Type: int(Range: [1..99])
Description: External NP Partner associated network appearance. Corresponding SCCP NA must be defined.
EXTNP_E164 - External NP E164
Permissions: Writeable and Createable
Type: string
Description: External NP Partner E.164 number. GT routed INAP queries are sent to this address.
SSN - InitialDP SSN
Permissions: Writeable and Createable
Type: SCCPSSN={2 to 255}
Description: INAP Initial-DP SCCP Called & Calling Subsystem Number. Default of 12 (INAP).
APPCTXT - InitialDP Application Context
Permissions: Writeable
Type: string
Description: INAP Initial-DP Dialogue Portion Application Context. OID formatted string. Default of 0.3.144.12.1.1.1.0.
SERVICE_KEY - InitialDP Service Key
Permissions: Writeable
Type: ServiceKey={0 to 2147483647}
Description: INAP Initial-DP mandatory Service Key parameter. Default of 15.
E164_CLG - InitialDP E164 Calling
Permissions: Writeable and Createable
Type: string
Description: INAP Initial-DP Calling Party Number E.164 signals. The generated INAP Initial-DP query will include these E.164 digits with the International nature of address in the Calling Party Number parameter.
EDP - InitialDP EDP Support
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: INAP Initial-DP optional EDP parameter support. If ENABLED, the EventTypeBCSM parameter (tag 0x9c) is added with LI of 1 and value of analyzed Information (0x03). Default of DISABLED.
INAP_CTN_PREFIX - INAP Continue Prefix
Permissions: Writeable and Createable
Type: string
Description: Prefix added to the SCCP Called Party Address signals for GT routing of the intercepted message based on an INAP Continue response. Maximum size is 6 digits. Hexadecimal values supported.