Usage of the Easy Config wizard to configure the Sonus SBC 1000/2000 does not modify existing configuration. The wizard will simply add the new configuration elements to the Sonus SBC 1000/2000.
SBC Easy Configuration supports IPv4 only, not IPv6.
The Sonus SBC 1000/2000 Easy Config interface includes a built-in step-by-step setup configuration wizard, which enables end-users to quickly deploy Sonus SBC 1000/2000 in an Enterprise's Lync environment with a SIP Trunk Provider to an IP phone. The Sonus SBC 1000/2000 can be configured to use a SIP trunk to connect to IP phones using the automatic setup wizard as described in the section below.
The following SIP Trunks are supported:
- ATT&T IP Flexible Reach
- Generic SIP Trunk
- Verizon Managed Service
- KDDI SIP Trunk
- Broadsoft Trunk
Broadsoft Trunk is applicable only if the user endpoint is an IP phone.
Depending on the SIP trunk selected, the specific configuration fields are displayed in the Wizard. These are noted below.
Step 1 - Select Scenario
These instructions assume the SBC Easy Config wizard is running. See Running Easy Configuration Wizard.
Select the Application type (SIP Trunk ↔ IP Phones). Enter the scenario configuration details based on your deployment settings. Once completed, click Next to move to Step 2 (or Cancel to return to the main WebUI screen).
Scenario - Field Definitions
Step 1
Application
The scenario in which the configuration template is provided. In this case, select SIP Trunk ↔ IP Phones.
Scenario Description
Enter the name to describe the SIP Trunk ↔ IP Phone setup.
This value will be prefixed on all the Sonus SBC 1000/2000 configuration elements created by the Setup Wizard pertaining to this deployment.
Telephone Country
The country in which the SIP Trunk ↔ IP Phones originates.
Emergency Services
The E911 Elin number from the "CompanyName" field configured in Lync location services is used as the authoritative Call Back number for outgoing E911 calls, and is always the preferred configuration. Specifically, it will take precedence over any Callback Number number configuration in Lync Setup. For more information, see Creating and Modifying Entries to Transformation Tables.
Defines the Emergency Services for outgoing numbers. For the purpose of this illustration above, Emergency Services is not selected. Field definitions are defined below.
Options: ELIN Identifier, E911/E112 or None.
Emergency Callback Number 1
Call Back Number in string format. This field is displayed only when ELIN Identifier or E911/E112 is selected from Emergency Services.
Emergency Callback Number 2
Second Call Back Number in string format. This field is displayed only when ELIN Identifier or E911/E112 is selected from Emergency Services.
PSAP Number
Defines the Public Safety Answering Point Number. Valid entry 1 - 127 characters.
SIP Sessions
Number of simultaneous SIP sessions allocated. Valid entry 1 - 960.
Name (SIP Trunk)
The SIP trunk used for connection to the IP phones. Valid options: Generic SIP Trunk, AT&T IP Flexible Reach, Verizon Managed Service, KDDI SIP Trunk and Broadsoft Trunk.
The SIP Trunk selected determines the field options displayed in Step 2. See Step 2 - Configure SIP Details for Endpoint.
Broadsoft Trunk Type
Defines the Broadsoft Trunk Type. Valid entry: Enterprise or Access.
This field is available only when the SIP Trunk type is Broadsoft Trunk.
User Type (IP Phone Registrar)
IP Phone Registrar. This field is fixed.
Step 2 - Configure SIP Details for Endpoint
Enter the scenario configuration details based on your endpoint. Once completed, click Next to move to Step 3 (or Previous to return to the previous screen).
Generic SIP Trunk - Field Definitions
These fields apply if you selected Generic SIP Trunk in Step 1 - Select Scenario.
Generic SIP Trunk
Border Element Server
The FQDN or IP address of the Session Border Controller service provider.
Protocol (Border Element Server)
The IP protocol to use for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. Valid entry UDP or TCP.
Port Number (Border Element Server)
The SIP Server Port number used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server.
Use Secondary Border Element Server
Enables or disables the secondary Session Border Controller service provider configured.
Secondary Border Element Server
Specifies the Secondary Border Element Service provider. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Border Element Server is Enabled.
Protocol (Secondary Border Element Server)
The Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled.
Port Number (Secondary Border Element Server)
The Port Number used for sending and receiving messages between Sonus SBC 1000/2000 and the Secondary Border Element server. This field is available only when Use Secondary Border Element Server is Enabled.
IP Phone Numbering Plan
Defines the IP phone numbering plan to be used. Valid options: E.164, National, or Extension.
Number of Users
Defines the number of users. Valid entry 1 - 1000.
Protocol (IP Phone)
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP.
Port Number (IP Phone)
The Port Number used for sending and receiving messages between Sonus SBC 1000/2000 and the IP phone. Default entry: 5060.
IP Phone Network Addresses
Configure a network address and Netmask for the host or subnet in in which the IP phones reside.
Network IP. IP address for the destination host or subnet in which the IP phone resides.
Netmask. The network mask of the destination host or subnet in which the IP phones resides.
To create a network address, click the ( 
) icon. Enter the Network IP and Network Mask and click OK.
Add Network/Mask
AT&T IP Flexible Reach - Field Definitions
These fields apply if you selected AT&T IP Flexible Reach in Step 1 - Select Scenario.
AT&T IP Flexible Reach
Border Element Server
The FQDN or IP address of the Session Border Controller service provider.
Protocol (Border Element Server)
The IP protocol used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. Valid entry UDP or TCP.
Port Number (Border Element Server)
The SIP Server Port number used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server.
Use Secondary Border Element Server
Enables or disables the secondary Session Border Controller service provider configured.
Secondary Border Element Server
Specifies the Secondary Border Element Service provider. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Border Element Server is Enabled.
Protocol (Secondary Border Element Server)
The Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled.
Port Number (Secondary Border Element Server)
The Port Number is used for sending and receiving messages between Sonus SBC 1000/2000 and the Secondary Border Element server. This field is available only when Use Secondary Border Element Server is Enabled.
AT&T Forking Feature
Enables/disables AT&T Forking Feature. Valid option: Yes or No.
AT&T IP Toll Free
Enables/disables the AT&T Toll Free option. Valid option: Enabled or Disabled.
IP Toll Free Access Number
The Toll Free Access Number to use when the AT&T IP Toll Free option is enabled.
IP Phone Numbering Plan
Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension.
Number of Users
Define the number of users. Valid entry 1 - 1000.
Protocol (IP Phone)
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP.
Port Number (IP Phone)
The Port Number used for sending and receiving messages between Sonus SBC 1000/2000 and the IP phone. Default entry: 5060.
IP Phone Network Addresses
Configure a network address and Netmask for the host or subnet in which the IP phone resides.
Network IP. IP address for the destination host or subnet in which the IP phone resides.
Netmask. The network mask of the destination host or subnet in which the IP phones resides.
To create a network address, click the ( ) icon. Enter the Network IP and Network Mask and click OK.
Add Network/Mask
Verizon Managed Service - Field Definitions
These fields apply if you selected Verizon Managed Service in Step 1 - Select Scenario.
Verizon Managed Service
Border Element Server
The FQDN or IP address of the Session Border Controller service provider.
Protocol (Border Element Server)
The IP protocol used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. This value is fixed at UDP.
Port Number (Border Element Server)
The SIP Server Port number used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server.
IP Phone Numbering Plan
Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension.
Number of Users
Define the number of users. Valid entry 1 - 1000.
Protocol (IP Phone)
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP.
Port Number (IP Phone)
The Port Number used for sending and receiving messages between Sonus SBC 1000/2000 and the IP phone. Default entry: 5060.
IP Phone Network Addresses
Configure a network address and Netmask for the host or subnet in which the IP phone resides.
Network IP. IP address for the destination host or subnet in which the IP phone resides.
Netmask. The network mask of the destination host or subnet in which the IP phones resides.
To create a network address, click the ( ) icon. Enter the Network IP and Network Mask and click OK.
Add Network/Mask
KDDI SIP Trunk - Field Definitions
These fields apply if you selected KDDI SIP Trunk in Step 1 - Select Scenario.
KDDI SIP Trunk
SIP Server
The FQDN or IP address of the Session Border Controller service provider.
Protocol
The IP protocol used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. Valid entry UDP or TCP.
Port Number
The SIP Server Port number used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server.
Called Prefix
Used for setting up transformation rules for the FMC service.
Address of Record URI
Address of Record of the client that is registered on the SIP server.
Static Host
Address of Static Host. Valid options: FQDN[:port] or IP4 [:port] or [IP6]:port
Authentication ID
Specifies a user name to use in response to a challenge.
Enter Password
The password for the Authentication ID.
Confirm Password
Re-enter the password for the Authentication ID.
DNS Server IP
IP address (IPv4 or IPv6) of the DNS server.
Domain Name
Domain name associated with the DNS IP address.
IP Phone Numbering Plan
Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension.
Number of Users
Define the number of users. Valid entry 1 - 1000.
Protocol (IP Phone)
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP.
Port Number (IP Phone)
The Port Number used for sending and receiving messages between Sonus SBC 1000/2000 and the IP phone. Default entry: 5060.
IP Phone Network Addresses
Configure a network address and Netmask for the host or subnet in which the IP phone resides.
Network IP. IP address for the destination host or subnet in which the IP phone resides.
Netmask. The network mask of the destination host or subnet in which the IP phones resides.
To create a network address, click the ( ) icon. Enter the Network IP and Network Mask and click OK.
Add Network/Mask
Broadsoft Trunk - Field Definitions
These fields apply if you selected Broadsoft Trunk in Step 1 - Select Scenario.
Broadsoft Trunk
Server Domain
The FQDN of the server domain.
Enterprise Trunking
Enables/disables Enterprise Trunking. This field is available only when Enterprise Trunking is selected in the Broadsoft Trunk Type field.
IP Phone Numbering Plan
Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension.
Number of Users
Define the number of users. Valid entry 1 - 1000.
Protocol (IP Phone)
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP.
Port Number (IP Phone)
The Port Number used for sending and receiving messages between Sonus SBC 1000/2000 and the IP phone. Default entry: 5060.
IP Phone Network Addresses
Configure a network address and Netmask for the host or subnet in which the IP phone resides.
Network IP. IP address for the destination host or subnet in which the IP phone resides.
Netmask. The network mask of the destination host or subnet in which the IP phones resides.
To create a network address, click the ( ) icon. Enter the Network IP and Network Mask and click OK.
Add Network/Mask
Step 3 - Confirm and Submit Configuration
This steps displays a summary of the the configuration items from Step 1 and Step 2. Click Finish (to cancel the configuration, click Cancel).
This example displays a SIP ↔ IP Phones with a Generic SIP Trunk.
Step 3
Overview
Content Tools