DO NOT SHARE THESE DOCS WITH CUSTOMERS!
This is an LA release that will only be provided to a select number of PLM-sanctioned customers (PDFs only). Contact PLM for details.
In this section:
The SBC can disable/set Out of Service the server at the IP peer level. In order to do so, your network must know the server IP address of the peer.
The SBC uses a Domain Name Server (DNS) server to resolve the Fully Qualified Domain Name (FQDN), and obtains multiple IP peer addresses. After a carrier notifies your network that a particular server has an issue and is out of service, your network server's peer mode is set to Out Of Service
This feature provides the flexibility to block peers individually within a trunk group. The can be set to out of service, rejecting both incoming and outgoing calls.
Unless noted otherwise, the parameter values in this section apply to the SBC Core.
This command allows the user to terminate calls immediately or after some specified time.
% set addressContext <adddress context name> zone <zone name> ipPeer <ip peer name> action <dryUp | force>
set addressContext addr_2 zone ZONE_AS ipPeer ABC action dryUp