This section includes the following topics for installing and configuring the SBC 5000 series (51x0/52x0) and SBC 7000 software components.
Software Installation Overview
- SBC 5000 and 7000 Series Software Components
- Installation Sequence
- System Name and Hostname Naming Conventions
Creating an IP Plan
Configuring the SBC 5000 Series Platform
- Configuring BMC IP Address Via Serial Console
- BMC Brute Force Password Guessing
- Configuring SBC 5xx0 BMC for Remote Access
- Configuring the Host Network Management Interface
- Configuring NTP Server Settings Using BMC
- Uploading New SSL Certificates using BMC
- Changing the BMC Password
- Launching the Remote Console from the BMC
Configuring the SBC 7000 Platform
- Configuring SBC 7000 BMC IP Address Via Serial Console
- Configuring SBC 7000 BMC for Remote Access
- Configuring SBC 7000 Host Network Management Interface
- Configuring NTP Server Settings Using SBC 7000 BMC
- Uploading New SSL Certificates using SBC 7000 BMC
- Changing the SBC 7000 BMC Password
- Launching the Remote Console from the SBC 7000 BMC
Installing SecureLink for Remote Access
Installing SBC Application
- Downloading Software from the Ribbon Support Portal
- Uploading SBC Package to SBC Platform
- Setting Up Physical Connection between High Availability Nodes
- Installing SBC Application Using the ERE
Re-Installing ConnexIP Operating System for SBC 5000 Series
Re-Installing ConnexIP Operating System for SBC 7000 Series
Warning
The SBC Core system is a closed network device. Customer modifications at the Linux level are not allowed or supported. These modifications can cause stability, update and fail-over issues.
Customers should only configure the SBC using the supported interfaces (CLI, REST, EMA, EMS).
Overview
Content Tools