In this section:
Viewing Ip ACL Rules Using CLI
The Bucket Size value is insignificant if the Fill Rate value is unlimited. If the ACL rules with action = discard, the Fill Rate and the Bucket Size values are irrelevant, and the packets are dropped based on the Type, IP address, or Port. The Fill Rate and the Bucket Size parameters do not play any role since the policer portion of an ACL is only applicable for the "accept" action and is ignored with the "discard" action since all the packets are already discarded by the criteria.
Use following commands to view Ip ACL Rule details for default address context:
CLI | Purpose |
---|---|
| List of existing ACLs |
| List of ACL rules in table format |
| List of ACL rules by precedence in table format |
Viewing an Existing Ip ACL Rule using EMA
To view an existing Ip ACL Rule, perform the following:
- On SBC main screen, navigate to All > Address Context > Ip Access Control List > Rule.
- Select the required Address Context from the Address Context drop-down menu.
The Rule window is displayed.
Figure 1: Rule
Viewing Ip ACL Rules by Precedence using EMA
To view Ip ACL Rules by precedence, perform the following:
- On SBC main screen, navigate to Monitoring > Security > IP Access Control List > Ip Acl Rules By Precedence.
- Select the required Address Context from the Address Context drop-down
The Ip Acl Rule By Precedence window is displayed.
Figure 2: Ip Acl Rule by Precedence