DO NOT SHARE THESE DOCS WITH CUSTOMERS!

This is an LA release that will only be provided to a select number of PLM-sanctioned customers (PDFs only). Contact PLM for details.

Command Syntax

DSP Mismatch Action
% set system admin <SYSTEM NAME> dspMismatchAction <preserveCapacity | preserveRedundancy>

Command Parameters

DSP Mismatch Action Parameters

Parameter

Description

dspMismatchAction

Use this parameter to specify the action to take if a DSP mismatch is detected between the active and standby servers. 

  • preserveCapacity – The Active SBC continues to use the extra DSP capacity, as needed, assuming appropriate session licenses are in place; partial redundancy is in effect.

  • preserveRedundancy (default) – The Active automatically triggers a graceful dry-up in an attempt to align DSP hardware capabilities. Once dry-up completes, the Active SBC uses the protected, matching DSP capacity to preserve redundancy.

NOTE: If a switchover occurs, calls using the extra, non-matching DSP capacity on Active are not protected during switchover (i.e. partial redundancy).

NOTE: During the dry-up period, active calls using the extra, non-matching DSP capacity are not protected in the event that a switchover occurs before the dry up completes.


  • No labels