Sip Cac Profile - Subscribe

In this section:

Specifies the details about Subscribe policer.

To View and Edit Subscribe

On SBC main screen, go to Configuration > System Provisioning > Security Configuration > Sip Cac Profile > Subscribe.

Select the desired Sip Cac Profile from the drop-down list to view its respective Subscribe parameters.

The Subscribe window is displayed.

Figure 1: Security Configuration - Sip Cac Profile - Subscribe

The following fields are displayed:

Table 1: Subscribe Parameters

Parameter	Description
`Ingress Aggregate Preference`	Specifies the preference for SUBSCRIBE within the ingress aggregate policer. The value range from 1 - 10. The default value is 1.
`Ingress Burst Size`	Specifies the maximum burst size for ingress SUBSCRIBE. The value range from 1 - 10000. The default value is 1.
`Ingress Rate`	Specifies the maximum ingress Other Requests rate in SUBSCRIBE per period. The value range from 1 - 1000 or `unlimited`.
`Ingress Rate Period`	Specifies the time period (in seconds) over which ingress SUBSCRIBE rate applies. The value range from 1 - 10 seconds. The default value is 1 second.
`Egress Aggregate Preference`	Specifies the preference for SUBSCRIBE within the egress aggregate policer. The value range from 1 - 10. The default value is 1.
`Egress Burst Size`	Specifies the maximum burst size for egress SUBSCRIBE. The value range from 1 - 1000. The default value is 1.
`Egress Rate`	Specifies the maximum egress SUBSCRIBE rate in aggregate messages per period. The value range from 1 - 1000 or `unlimited`.
`Egress Rate Period`	Specifies the time period (in seconds) over which egress SUBSCRIBE rate applies. The value range from 1 - 10 seconds. The default value is 1 second.

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.