For SBC SWe systems, use this window to specify the configuration profile you want to use to specify provisioning limits for the system. The Small or Large profile should be selected based on the available RAM capacity for the system. Refer to SBC Provisioning Limits for more information.
To specify the Swe Config profile to use, go to All > System > Swe Config Profile Selection. The Swe Config Profile Selection window opens where you can select either the Small or Large profile.
Swe Config Profile Selection Window
Click on the profile you want to activate and then click Save.
- Small (default) is applicable when the VM RAM is greater than or equal to 10 GiB.
- Large is applicable when the VM RAM is greater than or equal to 18 GiB.
Both Small and Large profiles are applicable when the VM RAM is greater than or equal to 18 GiB. However, only the Small profile is applicable when the VM RAM is less than 18 GiB.
For a profile change to take effect, both nodes in the system must be rebooted and all active calls are lost. The system prompts you to confirm that it will reboot before activating the profile change.
Overview
Content Tools