In this section:
This page allows you to configure the SIP proxy settings.
To configure SIP proxy settings:
Choose SIP UA > SIP Proxies from the Configuration Menu.
- Configure settings using the information in the following table as a guide. When you finish configuring settings, click Submit to make your changes take effect. For more information on submitting your changes, refer to Submit Configuration Changes
Add New SIP Server
The system supports auto-failover to secondary SIP servers - if it is provided with a list of SIP servers.
In normal IAD mode, you are required to provide IP addresses of the SIP servers, not DNS addresses. But in IAD with geo-redundancy mode, you can specify either IP addresses or FQDNs of the SIP Servers.
To add a new SIP server to the list:
Choose SIP UA > SIP Proxies.
To manually enter the list click Create, adjacent to the List of SIP Servers. The GUI will change to present a window for adding and viewing SIP Server details.
Enter the following details and click Add:
IP Address: Enter the IP address/FQDN of the SIP Server.
NoteFQDN is supported only in IAD mode with geo-redundancy. If your EdgeMarc 300 device is ATA licensed, IAD mode and geo-redundancy mode are enabled by default.
Port: Enter the port of the SIP Server
NoteURLs are not allowed in these fields.
- Click Submit All to save your changes. For more information on submitting your changes, refer to Submit Configuration Changes
Proceed to View the List of SIP Servers.
View the List of SIP Servers
Refer to Add New SIP Server before trying to view the list of SIP Servers.
To view the list of SIP Servers:
- Choose SIP UA > SIP Proxies from the Configuration Menu.
If a list of SIP Servers is available, it is displayed on the List of SIP Servers table.
Sort SIP Servers in the List
To sort SIP Servers in the list:
- Choose SIP UA > SIP Proxies from the Configuration Menu.
- In the List of SIP Servers table, click the Move Up or Move Down icon adjacent to the SIP Server entries that you want to move up or down the list.
- You are prompted to Submit All.
- Click Submit All save changes. For more information on submitting your changes, refer to Submit Configuration Changes
Delete a SIP Server
To delete a SIP Server from the list:
- Choose SIP UA > SIP Proxies from the Configuration Menu.
- In the List of SIP Servers table, click the Delete icon adjacent to the SIP Server entries that you want to delete. Click Delete All to delete all entries.
- You are prompted to Submit All.
- Click Submit All save changes. For more information on submitting your changes, refer to Submit Configuration Changes