In this section:
The mgmtStaticRoute
object is used to configure static IP routes for the management interfaces. A static route indicates the nextHop gateway and management interface that is used for a particular peer network IP prefix.
A route preference may be configured for static routes as shown in the command syntax. The lower the preference value, the more likely the route will be used.
% set system mgmtStaticRoute <destinationIpAddress> <prefix> <nextHopIPaddress> mgmtGroup <mgmtIntf1 | mgmtIntf2 | mgmtIntf3 | mgmtIntf4> preference <1-99> % show system mgmtStaticRoute <destinationIpAddress> <prefix> <nextHopIPaddress> mgmtGroup <mgmtIntf1 | mgmtIntf2 | mgmtIntf3 | mgmtIntf4> preference <1-99> % delete system mgmtStaticRoute
To display management static route configuration:
% show system mgmtStaticRoute mgmtStaticRoute 0.0.0.0 0 0.0.0.0 mgmtGroup mgmtIntf2 { preference 10; } mgmtStaticRoute 0.0.0.0 0 10.34.26.1 mgmtGroup mgmtIntf1 { preference 10; } mgmtStaticRoute 10.34.26.151 2 10.34.26.153 mgmtGroup mgmtIntf1 { preference 20; }