DO NOT SHARE THESE DOCS WITH CUSTOMERS!
This is an LA release that will only be provided to a select number of PLM-sanctioned customers (PDFs only). Contact PLM for details.
Use this object to execute a request command to query PSX on new refresh REGISTERs. This request command is used for one sequence of refresh REGISTERs on all active registrations, which are routed after a PSX query. These routes are selected from the new PSX query response.
If both request command and IPSP flags (IP Signaling Profile - Common IP Attributes - Registrar Recovery) are configured, command takes the preference over IPSP flags.
To Run Query PSX On Next Refresh Register Command
On SBC main screen, go to All > Address Context > Zone > Sip Trunk Group > Cmds.
Query PSX On Next Refresh Register command can be executed for a specific Sip Trunk Group created under a specific Zone under a specific Address Context. Use the drop-down box to select the desired Address Context, Zone and Sip Trunk Group. The Cmds window is displayed.
Cmds
Select Query PSX On Next Refresh Register from the command drop-down list and click Select. The queryPsxOnNextRefreshRegister window is displayed.
queryPsxOnNextRefreshRegister Window
The following fields are displayed:
Cmds Parameters
Parameter | Description |
|---|---|
| Overrides SBC internal expires timer. The options are:
|
New Registrar Index | Route index to attempt after force PSX query. Range is 0 to MaxRoute Index and default value is 0. |
Registrar IP Address | This flag is used only for registrations towards this REGISTRAR IP. Default value = 0.0.0.0 Use either |
Registrar FQDN | This flag is used only for registrations towards this REGISTRAR FQDN. Use either |
Make the required changes and click queryPsxOnNextRefreshRegister to execute the command. A confirmation dialog box is displayed.
Command Confirmation
Click OK to finish.
Overview
Content Tools