In this section:
| Common Call Statistics Terminology | |
|---|---|
| Stable Calls | Calls that are established and fully stable (connected and media cut-through type of calls) and will survive a fail-over. This excludes calls in establishing, clearing and updating states which will not survive a fail-over. |
| Active Calls | A snapshot of total number of active calls on the SBC at the point of execution of the status command. This count reflects the actual live calls on the box independent of the state of the call (setup, stable, updating or clearing). |
| Call Attempts | Accumulative number of attempted calls on this system since the last reboot/start-up, including calls where a setup was sent/received, uncompleted calls (calls failed, busy, not answered, etc.) and calls completed (answered). |
| Call Completions | Accumulative number of calls completed on this system since the last reboot/start-up. |
The SBC allows the operator to access data from the current interval and from the interval statistics table related to each object being monitored. The current interval consists of a statistics table entry that is accumulating data for the next interval report. The interval statistics table is a series of statistics table entries containing data from the most recently completed n intervals (where n is the number of intervals in the retention policy configuration).
Note
Refer to Links to Statistics Pages to navigate to a particular EMA or CLI statistics page.
Note
If using the EMS in your network, configure EMS PM data collection intervals for the SBC to be both:
- Equal to or greater than the SBC intervals size, and
- Not less than the SBC interval size multiplied by the SBC number of intervals.
Refer to Insight EMS User Guide for configuration details.
SBC intentionally does not display results of all calls when there is a high volume of traffic for the statistics below. This limitation is built into the SBC software to avoid excessive CPU usage and system timeouts.
- sipActiveGroupRegStatus
- sipActiveRegisterNameStatus
- sipDeletedRegisterNameStatus
- sipSigConnStatus
- sipSigTlsSessionStatus
CAC Offender Status
Command Syntax
> show status addressContext <addressContext_name> cacOffenderStatus <index number> egressCallRejects egressMessageRejects egressNotifyRejects egressOptionsRejects egressOtherRequestRejects egressReferRejects egressSubscribeRejects firstRejectAt ingressCallRejects ingressMessageRejects ingressNotifyRejects ingressOptionsRejects ingressOtherRequestRejects ingressReferRejects ingressSubscribeRejects ipAddress lastRejectAt messageFirstRejectAt messageLastRejectAt notifyFirstRejectAt notifyLastRejectAt optionsFirstRejectAt optionsLastRejectAt otherFirstRejectAt otherLastRejectAt referFirstRejectAt referLastRejectAt subscribeFirstRejectAt subscribeLastRejectAt zoneId
MultiExcerpt named CACOffenderStatus was not found -- Please check the page name and MultiExcerpt name used in the MultiExcerpt-Include macro
Diameter Node
Command Syntax
> show status addressContext <addressContext_name> diamNode <diamNode name> diamPeerStatus dumpPdu ipInterfaceGroupName ipV4Address ipV6Address originRealm peer primaryOriginHost realmRoute rfCurrentStatistics rfIntervalStatistics secondaryOriginHost state transactionTimeouts
MultiExcerpt named DiameterNode was not found -- Please check the page name and MultiExcerpt name used in the MultiExcerpt-Include macro
DNS Group
Command Syntax
> show status addressContext <addressContext_name> dnsGroup <dnsGroup name> dnsEntryDataStatus dnsEntryStatus dnsServerStatistics
MultiExcerpt named DNSGroup was not found -- Please check the page name and MultiExcerpt name used in the MultiExcerpt-Include macro
Dynamic Blacklist
Command Syntax
> show status addressContext <addressContext_name> dynamicBlackList dblPolicerStatus cumulativeEnforcements policerEnforcements dblStatus currentAction <blacklist | watch> discardPacketCount effectivePeriodRemaining trunkGroup
MultiExcerpt named DynamicBlacklist was not found -- Please check the page name and MultiExcerpt name used in the MultiExcerpt-Include macro
Intercept
Command Syntax
> show status addressContext <addressContext_name> intercept callDataChannel interceptCallDataChannelStatistics
MultiExcerpt named Intercept was not found -- Please check the page name and MultiExcerpt name used in the MultiExcerpt-Include macro
IP Access Control List
Command Syntax
> show status addressContext <addressContext_name> ipAccessControlList defaultAclStatistics getAggrPolicers ipAclOverall ipAclRule ipAclRulesByPrecedence rule
MultiExcerpt named IPAccessControlList was not found -- Please check the page name and MultiExcerpt name used in the MultiExcerpt-Include macro
IP Interface Group
Command Syntax
> show status addressContext <addressContext_name> ipInterfaceGroup <IG name> ipInterface ipInterfaceStatus ipsec mediaPortRangeAssigned mediaPortRangeUnassigned tcpPortRangeAssigned tcpPortRangeUnassigned
MultiExcerpt named IPInterfaceGroup was not found -- Please check the page name and MultiExcerpt name used in the MultiExcerpt-Include macro
IP Route Status
Command Syntax
> show status addressContext <addressContext_name> ipRouteStatus <system name> <ip address> <prefix> protocol <bbnSpfIgp | bgp | ciscoEigrp | ciscoIgrp | egp | esIs | ggp | hello | icmp | idpr | isIs | local | netmgmt | ospf | other | rip>
MultiExcerpt named IPRouteStatus was not found -- Please check the page name and MultiExcerpt name used in the MultiExcerpt-Include macro
IPsec
Command Syntax
> show status addressContext <addressContext_name> ipsec ikeSaStatistics ikeSaStatus ipsecSaStatistics ipsecSaStatus systemStatistics
MultiExcerpt named IPsec was not found -- Please check the page name and MultiExcerpt name used in the MultiExcerpt-Include macro
Link Detection Group
Command Syntax
> show status addressContext <addressContext_name> linkDetectionGroup linkDetectionGroup linkDetectionGroupStatistics linkDetectionGroupStatus
MultiExcerpt named LinkDetectionGroup was not found -- Please check the page name and MultiExcerpt name used in the MultiExcerpt-Include macro
Link Detection Group Statistics
Command Syntax
> show status addressContext <addressContext_name> linkDetectionGroupStatistics <Link Detection Group name> doubleFailures failures singleFailures
MultiExcerpt named LinkDetectionGroupStatistics was not found -- Please check the page name and MultiExcerpt name used in the MultiExcerpt-Include macro
Link Detection Group Status
Command Syntax
> show status addressContext <addressContext_name> linkDetectionGroupStatus <Link Detection Group name> failures
MultiExcerpt named LinkDetectionGroupStatus was not found -- Please check the page name and MultiExcerpt name used in the MultiExcerpt-Include macro
Logical Signal Address Binding Status
Command Syntax
> show status addressContext <addressContext_name> logicalSigAddressBindingStatus <ip interface>
MultiExcerpt named LogicalSigAddressBindingStatus was not found -- Please check the page name and MultiExcerpt name used in the MultiExcerpt-Include macro
Relay Current Statistics
Command Syntax
> show status addressContext <addressContext_name> relayCurrentStatistics
MultiExcerpt named RelayCurrentStatistics was not found -- Please check the page name and MultiExcerpt name used in the MultiExcerpt-Include macro
Relay Interval Statistics
Command Syntax
> show status addressContext <addressContext_name> relayIntervalStatistics
MultiExcerpt named RelayIntervalStatistics was not found -- Please check the page name and MultiExcerpt name used in the MultiExcerpt-Include macro
Relay Session Statistics
Command Syntax
> show status addressContext <addressContext_name> relaySessionStats
MultiExcerpt named RelaySessionStatistics was not found -- Please check the page name and MultiExcerpt name used in the MultiExcerpt-Include macro
SIP Active Group Registration Status
Command Syntax
> show status addressContext <addressContext_name> sipActiveGroupRegStatus <id> aorName | contactURI | creationTime | extExpirationTime | intExpirationTime | nextHopIpAddress | nextHopPortNum | regIdIsChild | registrarDomainName | registrarIpAddress | registrarPortNum | state
MultiExcerpt named SIPActiveGroupRegistrationStatus was not found -- Please check the page name and MultiExcerpt name used in the MultiExcerpt-Include macro
SIP Active Group Register Summary Status
Command Syntax
> show status addressContext <addressContext_name> sipActiveGroupRegSummaryStatus <registrar ip address> aorName nextRegIdIsChild state
MultiExcerpt named SIPActiveGroupRegistrationSummaryStatus was not found -- Please check the page name and MultiExcerpt name used in the MultiExcerpt-Include macro
SIP Active Register Name Status
Command Syntax
> show status addressContext <addressContext_name> sipActiveRegisterNameStatus <aor name> contactURI | creationTime | e2aeMediaSecurity | endPointBehindNapt | externalExpirationTime | internalExpirationTime | isRoaming | natPinholeLearningStatus | nextHopIpAddress | nextHopPortNum | registrarDomainName | registrarIpAddress | registrarPortNum | securityMechanismType | state
MultiExcerpt named SIPActiveRegisterNameStatus was not found -- Please check the page name and MultiExcerpt name used in the MultiExcerpt-Include macro
SIP Deleted Registration Status
Command Syntax
> show status addressContext <addressContext_name> sipDeletedRegStatus <id> aorName | contactURI | creationTime | nextHopIpAddress | nextHopPortNum | reasonCode | registrarDomainName | registrarIpAddress | registrarPortNum | terminationTime
MultiExcerpt named SIPDeletedRegistrationStatus was not found -- Please check the page name and MultiExcerpt name used in the MultiExcerpt-Include macro
SIP Deleted Register Name Status
Command Syntax
> show status addressContext <addressContext_name> sipDeletedRegisterNameStatus <aor name> contactURI | creationTime | nextHopIpAddress | nextHopPortNum | reasonCode | registrarDomainName | registrarIpAddress | registrarPortNum | terminationTime
MultiExcerpt named SIPDeletedRegisterNameStatus was not found -- Please check the page name and MultiExcerpt name used in the MultiExcerpt-Include macro
SIP Generated Subscription Status
Command Syntax
> show status addressContext default sipGeneratedSubscriptionStatus
MultiExcerpt named SIPGeneratedSubscriptionStatus was not found -- Please check the page name and MultiExcerpt name used in the MultiExcerpt-Include macro
SIP Registration Count Statistics
Command Syntax
> show status addressContext <addressContext_name> sipRegCountStatistics entry sipEmergencyRegAcceptTotal sipEmergencyRegActiveTotal sipRegCountAttempts sipRegCountCumCompletions sipRegCountPending sipRegCountStable sipRegCountTotal
MultiExcerpt named SIPRegistrationCountStatistics was not found -- Please check the page name and MultiExcerpt name used in the MultiExcerpt-Include macro
SIP Subscription Count Statistics
Command Syntax
> show status addressContext <addressContext_name> sipSubCountStatistics entry sipSubCountAttempts sipSubCountCumCompletions sipSubCountPending sipSubCountStable sipSubCountTotal
MultiExcerpt named SIPSubscriptionCountStatistics was not found -- Please check the page name and MultiExcerpt name used in the MultiExcerpt-Include macro
SIP Subscription Status
Command Syntax
> show status addressContext <addressContext_name> sipSubscriptionStatus <id> callId | expirationTime | nextHopIpAddress | nextHopPortNum | origEPDomain | previousHopIpAddress | previousHopPortNum | serverDomainName | state
MultiExcerpt named SIPSubscriptionStatus was not found -- Please check the page name and MultiExcerpt name used in the MultiExcerpt-Include macro
Surrogate Registration Count Statistics
Command Syntax
> show status addressContext <addressContext_name> surrRegCountStatistics entry surrRegActiveRegCount surrRegConfiguredCount
MultiExcerpt named SurrogateRegistrationCountStatistics was not found -- Please check the page name and MultiExcerpt name used in the MultiExcerpt-Include macro
Zone
Go to
for the following Zone status/statics details.- Zone
- Zone Current Statistics
- Zone Interval Statistics
- Zone Status
Command Examples
General Examples
To display the link Detection Group Status:
> show status addressContext default linkDetectionGroup
MGMT_LDG2 linkMonitorStatus MGMT_LM2
{
monitorStatus monitoring;
linkStatus up;
}
linkMonitorStatus MGMT_LM4
{
monitorStatus portDown;
linkStatus portDown;
}
linkMonitorStatistics MGMT_LM2
{
minTime 336;
maxTime 740;
averageTime 375;
singleFailures 0;
doubleFailures 0;
failures 0;
replies 13;
duplicateReplies 0;
lateReplies 0;
}
linkMonitorStatistics MGMT_LM4
{
minTime 0;
maxTime 0;
averageTime 0;
singleFailures 0;
doubleFailures 0;
failures 1;
replies 0;
duplicateReplies 0;
lateReplies 0;
}
To view default ACL statistics details:
> show status addressContext default ipAccessControlList defaultAclStatistics
defaultAclStatistics 9 {
protocol UDP;
application dns_udp_guest;
addressContextId *;
lifGrpId *;
sourceIpAddress "* (53)";
destinationIpAddress "* (0)";
policingMode PktRate;
bucketSize "50 pkt";
creditRate "1000 pkt/s";
polId 0;
polPriority 0;
packetAccept 0;
packetDiscard 0;
aggPol none;
owner vm;
vmGuestId Vm1;
}
Examples Showing Audio and Video Usage
Audio-Only CLI Output
admin@SBC01> show status addressContext default ipInterfaceGroup IG1
ipInterfaceStatus IF1 {
ifindex 13;
operState resAllocated;
oosReason notApplicable;
rxPackets 6488;
txPackets 140;
allocatedBandwidth 15800;
actualBandwidth 0;
bwDeviation 0;
numMediaStreams 1;
}
[ok][2014-07-17 16:47:26]
admin@SBC01> show status addressContext default ipInterfaceGroup IG2
ipInterfaceStatus IF2 {
ifindex 14;
operState resAllocated;
oosReason notApplicable;
rxPackets 270;
txPackets 2626;
allocatedBandwidth 15800;
actualBandwidth 0;
bwDeviation 0;
numMediaStreams 1;
}
[ok][2014-07-17 16:47:28]
admin@SBC01> show status addressContext default zone ZONE_IN_PCR1377 trunkGroupStatus
trunkGroupStatus TG_IN_PCR1377 {
state inService;
totalCallsAvailable -1;
totalCallsInboundReserved 0;
inboundCallsUsage 1;
outboundCallsUsage 0;
totalCallsConfigured -1;
priorityCallUsage 0;
totalOutboundCallsReserved 0;
bwCurrentLimit -1;
bwAvailable -1;
bwInboundUsage 124;
bwOutboundUsage 0;
packetOutDetectState normal;
}
[ok][2014-07-17 16:47:36]
admin@SBC01> show status addressContext default zone ZONE_OUT_PCR1377 trunkGroupStatus
trunkGroupStatus TG_OUT_PCR1377 {
state inService;
totalCallsAvailable -1;
totalCallsInboundReserved 0;
inboundCallsUsage 0;
outboundCallsUsage 1;
totalCallsConfigured -1;
priorityCallUsage 0;
totalOutboundCallsReserved 0;
bwCurrentLimit -1;
bwAvailable -1;
bwInboundUsage 0;
bwOutboundUsage 124;
packetOutDetectState normal;
}
Video-Only CLI Output
admin@SBC01> show status addressContext default ipInterfaceGroup IG2
ipInterfaceStatus IF2 {
ifindex 14;
operState resAllocated;
oosReason notApplicable;
rxPackets 236;
txPackets 1318;
allocatedBandwidth 128000;
actualBandwidth 21008;
bwDeviation 0;
numMediaStreams 1;
}
[ok][2014-07-17 16:33:21]
admin@SBC01> show status addressContext default ipInterfaceGroup IG1
ipInterfaceStatus IF1 {
ifindex 13;
operState resAllocated;
oosReason notApplicable;
rxPackets 5343;
txPackets 126;
allocatedBandwidth 128000;
actualBandwidth 23648;
bwDeviation 0;
numMediaStreams 1;
}
[ok][2014-07-17 16:33:25]
admin@SBC01> show status addressContext default zone ZONE_IN_PCR1377 trunkGroupStatus
trunkGroupStatus TG_IN_PCR1377 {
state inService;
totalCallsAvailable -1;
totalCallsInboundReserved 0;
inboundCallsUsage 1;
outboundCallsUsage 0;
totalCallsConfigured -1;
priorityCallUsage 0;
totalOutboundCallsReserved 0;
bwCurrentLimit -1;
bwAvailable -1;
bwInboundUsage 1000;
bwOutboundUsage 0;
packetOutDetectState normal;
}
admin@SBC01> show status addressContext default zone ZONE_OUT_PCR1377 trunkGroupStatus
trunkGroupStatus TG_OUT_PCR1377 {
state inService;
totalCallsAvailable -1;
totalCallsInboundReserved 0;
inboundCallsUsage 0;
outboundCallsUsage 1;
totalCallsConfigured -1;
priorityCallUsage 0;
totalOutboundCallsReserved 0;
bwCurrentLimit -1;
bwAvailable -1;
bwInboundUsage 0;
bwOutboundUsage 1000;
packetOutDetectState normal;
}
Both Audio and Video CLI Output
admin@SBC01> show status addressContext default ipInterfaceGroup IG1
ipInterfaceStatus IF1 {
ifindex 13;
operState resAllocated;
oosReason notApplicable;
rxPackets 6502;
txPackets 154;
allocatedBandwidth 143800;
actualBandwidth 0;
bwDeviation 0;
numMediaStreams 2;
}
[ok][2014-07-17 16:55:12]
admin@SBC01> show status addressContext default ipInterfaceGroup IG2
ipInterfaceStatus IF2 {
ifindex 14;
operState resAllocated;
oosReason notApplicable;
rxPackets 281;
txPackets 2635;
allocatedBandwidth 143800;
actualBandwidth 0;
bwDeviation 0;
numMediaStreams 2;
}
[ok][2014-07-17 16:55:19]
admin@SBC01> show status addressContext default zone ZONE_IN_PCR1377 trunkGroupStatus
trunkGroupStatus TG_IN_PCR1377 {
state inService;
totalCallsAvailable -1;
totalCallsInboundReserved 0;
inboundCallsUsage 1;
outboundCallsUsage 0;
totalCallsConfigured -1;
priorityCallUsage 0;
totalOutboundCallsReserved 0;
bwCurrentLimit -1;
bwAvailable -1;
bwInboundUsage 1124;
bwOutboundUsage 0;
packetOutDetectState normal;
}
[ok][2014-07-17 16:55:31]
admin@SBC01> show status addressContext default zone ZONE_OUT_PCR1377 trunkGroupStatus
trunkGroupStatus TG_OUT_PCR1377 {
state inService;
totalCallsAvailable -1;
totalCallsInboundReserved 0;
inboundCallsUsage 0;
outboundCallsUsage 1;
totalCallsConfigured -1;
priorityCallUsage 0;
totalOutboundCallsReserved 0;
bwCurrentLimit -1;
bwAvailable -1;
bwInboundUsage 0;
bwOutboundUsage 1124;
packetOutDetectState normal;
}
> show addressContext default sipActiveRegisterNameStatus
sipActiveRegisterNameStatus Sonus@10.54.8.191 268 {
state completed;
contactURI sip:Sonus@10.70.52.91:5070;
nextHopIpAddress 10.70.52.91;
nextHopPortNum 5070;
registrarIpAddress 10.128.254.86;
registrarPortNum 5090;
externalExpirationTime 3598;
internalExpirationTime 3600;
creationTime 2014-06-27T09:35:54+00:00;
registrarDomainName "";
endPointBehindNapt 0;
natPinholeLearningStatus none;
securityMechanismType none;
isRoaming 1;
}
To view SIP Peer CAC Status details:
show status addressContext addr_1 zone ZONE_IAD sipPeerCacStatus
sipPeerCacStatus "" 10.54.80.151 0 nonRegistrantSipPeer {
createdAt 2017-05-15T12:08:16+00:00;
ingressCallsAllowed 19;
ingressCallsActive 1;
ingressCallRejectsLimit 28;
ingressCallRejectsRate 0;
egressCallsAllowed 0;
egressCallsActive 0;
egressCallRejectsLimit 0;
egressCallRejectsRate 0;
state enabled;
ingressDblAggregateMessagesAllowed 0;
ingressDblAggregateMessageRejectsRate 0;
egressDblAggregateMessagesAllowed 0;
egressDblAggregateMessageRejectsRate 0;
ingressMessagesAllowed 0;
ingressMessageRejectsRate 0;
egressMessagesAllowed 0;
egressMessageRejectsRate 0;
ingressNotifysAllowed 0;
ingressNotifyRejectsRate 0;
egressNotifysAllowed 0;
egressNotifyRejectsRate 0;
ingressOptionsAllowed 0;
ingressOptionsRejectsRate 0;
egressOptionsAllowed 0;
egressOptionsRejectsRate 0;
ingressOtherRequestsAllowed 59;
ingressOtherRequestsRejectsRate 0;
egressOtherRequestsAllowed 0;
egressOtherRequestsRejectsRate 0;
ingressRefersAllowed 0;
ingressReferRejectsRate 0;
egressRefersAllowed 0;
egressReferRejectsRate 0;
ingressResponsesAllowed 0;
ingressResponseRejectsRate 0;
egressResponsesAllowed 0;
egressResponseRejectsRate 0;
ingressSubscribesAllowed 0;
ingressSubscribeRejectsRate 0;
egressSubscribesAllowed 0;
egressSubscribeRejectsRate 0;
bandwidthRejectsLimit 0;
videoThresholdLimit 0;
}
Overview
Content Tools