You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

This object controls donor switch service.

To View and Edit Donor Switch Service

On SBC main screen, go to Configuration > Profile Management > Category: Signaling Profiles > Signaling Profile > Egress > Donor Switch Service.

Select the desired Signaling Profile from the drop-down list to view its respective Donor Switch Service parameters.

The Donor Switch Service window is displayed.

Signaling Profiles - Signaling Profile - Egrees - Donor Switch Service

The following fields are displayed:

Signaling Profile - Egress - Donor Switch Service parameters

Parameter Description
Create Called Directory Number In Egress SignalThis flag is applicable only when the Donor Switch Service has been executed. When this flag is enabled, the egress signal contains the Called Directory Number (Dialed Number) and the Called Party Number (NRN).
Generate Redirection CountWhen this flag is enabled, the SBC adds the redirection counter to the egress IAM. This parameter is for backward compatibility with legacy systems.
Skip Redirection After Number TranslationsWhen this flag is enabled, PSX skips looking into several tables for redirection once number translation is complete for Donor switch service.
Undo Donor Switch ServiceWhen this flag is enabled, even though the Donor Switch Service is executed, the egress signal contains the Called Party Number containing the Dialed Number.

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

 

  • No labels