You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 9 Next »

REST API Method: POST /rest/tasks/modifydefaultvlan

Modifies the Default Untagged VLAN of a port on SBC Edge system.

URL:

https://192.168.0.111/rest/tasks/modifydefaultvlan

HTTP Method

POST

Requires Authentication:

true

modifydefaultvlan - REST API Methods

The root page @parent could not be found in space SBC 1000/2000 API.

Parameters

Parameter Name Required Service Affecting Data Type Default Value Possible Values Description
ethernetPortYesNointPossible values:
  • 0 - Minimum
  • 65535 - Maximum
Specifies the Ethernet Port's Row ID whose Default Untagged VLAN is to be modified. Ethernet Port's Row ID can be obtained by performing a lookup on ethernetport resource using GET ethernetport.
selectVlanOptionYesNoEnummodifyPossible values:
  • 0 - useExisting
  • 1 - create
Specifies the method for selecting the new Default VLAN. New Default VLAN can either be selected from the existing VLAN list or a new VLAN can be created.
defaultVlanIdYesNostringnone6 - Max Length Specifies the VLAN ID which is configured in the system, to be selected as the new Default Untagged VLAN. This field is inapplicable if selectVlanOption is set to 'create'.

VLAN ID should be specified in the format bridge_id:vlan_id, bridge_id is the Bridge Group ID and is always 1 for SBC Edge system. vlan_id is the VLAN ID configured.

vlan_idYesNostringnone6 - Max Length Specifies the VLAN ID to be created and configured as the new Default Untagged VLAN. This field is applicable only if selectVlanOption is set to 'create'.
vlan_descriptionYesNostringnone64 - Max Length Specifies a short description for the VLAN to be configured as the new Default Untagged VLAN. This field is applicable only if selectVlanOption is set to 'create'.
mstpInstanceYesNostringnone4 - Max Length Specifies the Multiple Spanning Tree Instance to be associated with the new Default Untagged VLAN. This field is applicable only if selectVlanOption is set to 'create'.

The MST Instance specified should be configured in the system, and should be specified in the format bridge_id:mst_id, bridge_id is the Bridge Group ID and is always set to 1 for SBC Edge system.

Helpful Tip

The POST can contain either only the attributes that are being updated, or the full set of attributes for the resource

  • No labels