This profile specifies the Egress parameters of CAC related to H323 Trunk Group.
To View and Edit CAC - Egress
On SBC main screen, go to Configuration > System Provisioning > Category: Trunk Provisioning > Trunk Group > H323Trunk Group > CAC > Egress. The Egress window is displayed.
The CAC - Egress can be checked for each Address Context, for each Zone, for each H323Trunk Group created or for all the Address Contexts, Zones and H323Trunk Groups created. Use the drop-down list to select the desired Address Context, Zone and H323Trunk Group.
Figure 1: H323Trunk Group - CAC - Egress Main Fields
The Edit Egress window is displayed.
Figure 2: H323Trunk Group - CAC - Egress Edit Window
The following fields are displayed:
Table 1: H323Trunk Group - CAC - Egress Parameters
|
|
|---|---|
Call Limit | Specifies the total number of calls allowed for Egress. |
Call Rate Max | Specifies the value of maximum allowed burst in calls/second (above the allowed sustained rate) for egress call attempts. The default value is unlimited (range: 1-450, or unlimited. SBC 7000 range is 1-1350, or unlimited). |
Call Burst Max | Specifies the value of maximum allowed burst (above the allowed sustained rate) for egress call attempts in calls/second. The default value is unlimited (range: 1-900, or unlimited. SBC 7000 range is 1-2700, or unlimited). |
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.
Overview
Content Tools