You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Use the Flags window to work with ingress flags, configured on SIP trunk groups, that are associated with routing SIP calls.

To View and Edit Flags

On the SBC main screen, go to Configuration > System Provisioning > Category: SIP Carrier Peering > Sip Trunk Group > Policy > Ingress > Flags or
All > Address Context > Zone > SIP Trunk Group > Policy > Ingress > Flags

Select the appropriate Address Context, Zone, and SIP Trunk Group from the drop-down lists. The Flags window is displayed.

Figure 1: Ingress Flags Window

Use the following table to set the flag values for a trunk group.

Table 1: SIP Trunk Group Ingress Flags

Parameter

Description

Non Zero Video Bandwidth Based Routing for SIP

 Specifies whether or not to use the non-zero video bandwidth for routing SIP calls. The options are:

  • Enable (default)
  • Disable

Non Zero Video Bandwidth Based Routing For H323

 Specifies whether or not to use the non-zero video bandwidth for routing H323 calls. The options are:
  • Enable 
  • Disable  (default)
Hd Preferred Routing

Specifies whether or not HD Preferred Routing is required for routing SIP calls. The options are:

  • Enable 
  • Disable  (default)
Hd Supported Routing

Specifies whether or not HD Supported Routing is required for routing SIP calls. The options are:

  • Enable 
  • Disable  (default)

Make the required changes and click Save.


  • No labels