In this section:

Specifies the details about the DBL Aggregate Rej policer.

To View and Edit DBL Aggregate Rej

On SBC main screen, go to Configuration > System Provisioning > Security Configuration > Sip Cac Profile > DBL Aggregate Rej.

Select the desired Sip Cac Profile from the drop-down list to view its respective DBL Aggregate Rej parameters.

The DBL Aggregate Rej window is displayed.

Figure 1: Security Configuration - Sip Cac Profile - DBL Aggregate Rej

The following fields are displayed:

Table 1: DBL Aggregate Rej Parameters

Parameter

Description

Ingress Burst
Size

Specifies the maximum burst size for ingress aggregate message. The value range from 1 - 10000. The default value is 10.

Ingress Rate

Specifies the maximum ingress aggregate message rate in aggregate messages per period. The value range from 1 - 1000 or unlimited.

Ingress Rate
Period

Specifies the time period (in seconds) over which ingress aggregate message rate applies. The value range from 1 - 10 seconds.

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.



  • No labels