In this Section:

 

Use this parameter to define the unique identifier for the codec entry.

Note

You can configure and use this parameter only when Announcement Based Flags of Local Ring Back Tone - Flags is enabled.

 

On the SBC main screen, navigate to All > Profiles > Media > Tone Codec Entry.

The Tone Codec Entry window is displayed.

Tone Codec Entry window

 

To Create a New Tone Codec Entry

To create a new Tone Codec Entry, Click +New Tone Codec Entry on the Tone Codec Entry List window.

The Create New Tone Codec Entry window is displayed.

Create New Tone Codec Entry - codec G711

 

The image above illustrates the Create New Tone Codec Entry window when the parameter Codec is set to G711. When the parameter Codec is set to other permissible values selected from its dropdown list, the Create New Tone Codec Entry window is displayed as illustrated below:

Create New Tone Codec Entry - codec G711

 

Note

For Edit and Copy tools, the same difference in the respective windows (as illustrated above) can be observed.

 

The parameters and their descriptions are given below:

Create New Tone Codec Entry - parameter descriptions

ParameterDescription
NameUse this parameter to define the unique identifier for the codec entry.
Codec
Use this parameter to specify the codec types.
The supported codec types are:
  • Amr Bandwidth Efficient
  • Amr Octet Aligned

  • Amrwb Bandwidth Efficient

  • Amrwb Octet Aligned
  • Evrc
  • Evrc0
  • Evrcb
  • Evrcb0
  • G711
LawUse this parameter to specify the G.711 law to use. This parameter is visible only when the codec type is set as  G711.
  • ALaw
  • ULaw (default)

NOTE: To view the parameter Law, select G711 from the Codec dropdown list.

Coding Rate

Use this parameter to specify the audio coding rate. This parameter is visible only when the codec type is selected either as of the following codecs:

  • Amr Bandwidth Efficient
  • Amr Octet Aligned

  • Amrwb Bandwidth Efficient

  • Amrwb Octet Aligned

NOTE: The Amr Bandwidth Efficient, Amr Octet Aligned, and Amrwb Octet Aligned codecs do not have corresponding announcement files mapping to the Segment ID.

When the codec type is selected either as Amr Bandwidth Efficient or as Amr Octet Aligned, the coding rates are:

  • AMR-0-4.75kbps (default)
  • AMR-1-5.15kbps 
  • AMR-2-5.90kbps 
  • AMR-3-6.70kbps 
  • AMR-4-7.40kbps 
  • AMR-5-7.950kbps 
  • AMR-6-10.20kbps 
  • AMR-7-12.20kbps

When the codec type is selected either as Amrwb Bandwidth Efficient or as Amrwb Octet Aligned, the coding rates are:

  • AMR-0-6.6 (default)
  • AMR-1-8.85
  • AMR-2-12.65
  • AMR-3-14.25
  • AMR-4-15.85
  • AMR-5-18.25
  • AMR-6-19.85
  • AMR-7-23.05
  • AMR-8-23.85
 

Click Save to save the changes. Click Undo Edits to cancel all changes.

To Edit a Tone Codec Entry

To edit a Tone Codec Entry, select the entry from the Tone Codec Entry List window by clicking the radio button next to it.

Tone Codec Entry - select

 

The Edit Selected Tone Codec Entry window is displayed.

Edit Selected Tone Codec Entry

Edit Selected Tone Codec Entry

For information on differences of the Edit Selected Tone Codec Entry window based on the choice of Codec, see this Note.

 

For information on the parameters displayed in the Edit Selected Tone Codec Entry window, see Tone Codec Entry - Parameter Descriptions.

Click Save to save the changes. Click Undo Edits to cancel all changes.

To Copy a Tone Codec Entry

To copy a Tone Codec Entry, select the entry from the Tone Codec Entry List window by clicking the radio button next to it.

Tone Codec Entry - select

 

The Copy Selected Tone Codec Entry window is displayed.

Copy Selected Tone Codec Entry

Copy Selected Tone Codec Entry

For information on differences of the Copy Selected Tone Codec Entry window based on the choice of Codec, see this Note.

 

For information on the parameters displayed in the Edit Selected Tone Codec Entry window, see Tone Codec Entry - Parameter Descriptions.

Click Save to save the changes. Click Undo Edits to cancel all changes.

To Delete Tone Codec Entry

To delete a Tone Codec Entry, select the entry from the Tone Codec Entry List window by clicking the radio button next to it.

Tone Codec Entry - select

 

Click the Delete symbol at the right end of the selected row. The Delete toneCodecEntry dialog box is displayed.

Delete toneCodecEntry

 

Click Yes to confirm deletion, or No to cancel it.

On successful deletion, a success message is displayed. Click OK to complete the deletion process.