In this section:
A license is required in order to use SWe Lite. Before you can generate a license you must download, install, and perform initial setup on the SBC SWe Lite software – see Downloading the SBC SWe Lite Package for details.
Step | Action |
---|---|
1 | Locate and make note of the SWe Lite ID – refer to . |
2 | Re-visit the Sonus Self-Service Licensing and Downloads portal, and submit your credentials to gain access. |
4 | Click Generate License Key. |
5 | Click Configuration. |
6 | Enter the SBC SWe Lite ID (as noted in Step 1) in the UUID#1 field and then click Generate. Note: In some instances, the field may be named SWe Lite ID#.
|
7 | Within 24 hours you will receive an email from Sonus Customer Support. Click and save the attachment. |
8 | With the attachment open in a text editor, select all text and copy it to your clipboard. |
9 | Open the SBC SWe Lite UI and click the Settings tab, and then click System > Licensing > Install New License.
|
10 | Review the prompt and then click OK. |
11 | Paste the previously copied License Key text into the designated text box: |
12 | Review the message and then click OK. |
13 | To see your currently installed licenses, click System > Licensing > Current Licenses. |
Configure the SBC SWe Lite according to desired deployment requirements. A suggested next step is to visit Using the Easy Configuration Wizard.