You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Current »

Specifies the parameters associated with the Ingress flags for routing Sip calls.

To View and Edit Flags

On SBC main screen, go to Configuration > System Provisioning > Category: SIP Carrier Peering > Sip Trunk Group > Policy > Ingress > Flags.

Select the desired Address Context, Zone and Sip Trunk Group from the drop-down list to view its respective Flags parameters.

The Flags window is displayed.

Profile Management - Media Profiles - Packet Service Profile - T38

The following fields are displayed:

Sip Trunk Group - Policy - Ingress - Flags parameters

Parameter

Description

Non Zero Video Bandwidth Based Routing for Sip

 Specifies whether to use the non-zero video bandwidth for routing Sip calls or not. The options are:

  • enable (default)
  • disable

Non Zero Video Bandwidth Based Routing For H323

 Specifies whether to use the non-zero video bandwidth for routing H323 calls or not. The options are:
  • enable 
  • disable  (default)
Hd Preferred Routing

Specifies if HD Preferred Routing is required for routing Sip calls or not. The options are:

  • enable 
  • disable  (default)
Hd Supported Routing

Specifies if HD Supported Routing is required for routing Sip calls or not. The options are:

  • enable 
  • disable  (default)

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

 

  • No labels