DO NOT SHARE THESE DOCS WITH CUSTOMERS!

This is an LA release that will only be provided to a select number of PLM-sanctioned customers (PDFs only). Contact PLM for details.

 

  1. Create the profile.

    set profiles signaling sipAdaptorProfile SDP-REMOVE rule 1



  2. Set the criteria.

    set profiles signaling sipAdaptorProfile SDP-REMOVE rule 1 criterion 1 type message
set profiles signaling sipAdaptorProfile SDP-REMOVE rule 1 criterion 2 type messageBody



  3. Configure the Message criteria.

    set profiles signaling sipAdaptorProfile SDP-REMOVE rule 1 criterion 1 type message message messageTypes response
set profiles signaling sipAdaptorProfile SDP-REMOVE rule 1 criterion 1 type message message methodType invite
set profiles signaling sipAdaptorProfile SDP-REMOVE rule 1 criterion 1 type message message statusCode 183



  4. Configure the Header criteria.

    set profiles signaling sipAdaptorProfile SDP-REMOVE rule 1 criterion 2 type messageBody messageBody condition exist
set profiles signaling sipAdaptorProfile SDP-REMOVE rule 1 criterion 2 type messageBody messageBody messageBodyType all
set profiles signaling sipAdaptorProfile SDP-REMOVE rule 1 action 1 type messageBody
set profiles signaling sipAdaptorProfile SDP-REMOVE rule 1 action 1 operation regdel
set profiles signaling sipAdaptorProfile SDP-REMOVE rule 1 action 1 regexp string ".*"
set profiles signaling sipAdaptorProfile SDP-REMOVE rule 1 action 1 to type messageBody messageBodyValue all



  5. Enable the state.

    set profiles signaling sipAdaptorProfile SDP-REMOVE state enabled
commit



  6. Associate this with the SIP Service Group.

    set addressContext defaultAddressContext zone ZONE_IAD sipTrunkGroup TG_SIPART_IAD signaling messageManipulation outputAdapterProfile SDP-REMOVE
commit

  • No labels