Show Table Address Context

In this section:

Common Call Statistics Terminology
Stable Calls	Calls that are established and fully stable (connected and media cut-through type of calls) and will survive a fail-over. This excludes calls in establishing, clearing and updating states which will not survive a fail-over.
Active Calls	A snapshot of total number of active calls on the SBC at the point of execution of the status command. This count reflects the actual live calls on the box independent of the state of the call (setup, stable, updating or clearing).
Call Attempts	Accumulative number of attempted calls on this system since the last reboot/start-up, including calls where a setup was sent/received, uncompleted calls (calls failed, busy, not answered, etc.) and calls completed (answered).
Call Completions	Accumulative number of calls completed on this system since the last reboot/start-up.

The SBC allows the operator to access data from the current interval and from the interval statistics table related to each object being monitored. The current interval consists of a statistics table entry that is accumulating data for the next interval report. The interval statistics table is a series of statistics table entries containing data from the most recently completed n intervals (where n is the number of intervals in the retention policy configuration).

Note

Refer to Links to Statistics Pages to navigate to a particular EMA or CLI statistics page.

Note

If using the EMS in your network, configure EMS PM data collection intervals for the SBC to be both:

Equal to or greater than the SBC intervals size, and
Not less than the SBC interval size multiplied by the SBC number of intervals.

Refer to the Insight EMS User Guide for configuration details.

SBC intentionally does not display results of all calls when there is a high volume of traffic for the statistics below. This limitation is built into the SBC software to avoid excessive CPU usage and system timeouts.

sipActiveGroupRegStatus
sipActiveRegisterNameStatus
sipDeletedRegisterNameStatus
sipSigConnStatus
sipSigTlsSessionStatus

Address Context

Command Syntax

> show table addressContext
	cacOffenderStatus 
	callDetailStatusDetail 
	callMediaStatusDetail 
	callSummaryStatusDetail 
	diamNode 
	dnsGroup 
	dynamicBlackList 
	enhancedDBL
	intercept
	ipAccessControlList
	ipInterfaceGroup 
	ipRouteStatus
	ipsec
	linkDetectionGroup 
	linkDetectionGroupStatistics 
	linkDetectionGroupStatus 
	logicalSigAddressBindingStatus 
	natDirectMediaGroup
	realm 
	relayCurrentStatistics 
	relayIntervalStatistics
	relaySessionStats
	rtpServerTable 
	sipActiveGroupRegStatus
	sipActiveGroupRegSummaryStatus 
	sipActiveRegisterNameStatus
	sipDeletedRegStatus
	sipDeletedRegisterNameStatus 
	sipGeneratedSubscriptionStatus 
    sipRegCountDomainCurStats
    sipRegCountDomainIntStats
	sipRegCountDomainStats
    sipRegCountStatistics
	sipSubCountStatistics
	sipSubscriptionCountStatistics 
	sipSubscriptionStatus
	staticRoute
	surrRegCountStatistics 
	zone 
	zoneCurrentStatistics
	zoneIntervalStatistics 
	zoneStatus

set profiles media beepToneProfile <profile_name>
   direction <ingress | egress | both>
   durationBetweenTone <0-65535>
   tonePower <-50-3>

Command Parameters

Address Context Parameters

Parameter	Description
`cacOffenderStatus`	This object displays recent SIP endpoint CAC offender details at the aggregate level (as opposed to the Address Context level) since the last system boot or restart. Go to Show Table Address Context - CAC Offender Status for details.
`callDetailStatusDetail`	Call status details per address context. Go to Show Table Address Context - Call Status Details for details.
`callMediaStatusDetail`	Call media status details per address context. Go to Show Table Address Context - Call Status Details for details.
`callSummaryStatusDetail`	Call summary details per address context. Go to Show Table Address Context - Call Status Details for details.
`diamNode`	Diameter node configuration details. Go to Show Table Address Context - Diameter Node for details.
`dnsGroup`	DNS Server Groups in this address context. Go to Show Table Address Context - DNS Group for details.
`dynamicBlackList`	The collection of DBL policers. Go to Show Table Address Context - Dynamic Blacklist for details.
`enhancedDBL`	The enhanced DBL related operations. Go to Show Table Address Context - Enhanced DBL Status for details.
`intercept`	Lawful Intercept Call Data Channel statistics details. Go to Show Table Address Context - Intercept for details.
`ipAccessControlList`	IP Access Control list details for this address context. Go to Show Table Address Context - IP Access Control List for details.
`ipInterfaceGroup`	IP Interface Group details for this address context. Go to Show Table Address Context - IP Interface Group for details.
`ipRouteStatus`	IP route details including the local IP interfaces and protocols associated with the next hop routes. Go to Show Table Address Context - IP Route Status
`ipsec`	IPsec configuration, security policy database, IKE peer table. Go to Show Table Address Context - IPsec
`linkDetectionGroup`	Link Detection Groups in this address context. Go to Show Table Address Context - Link Detection Group
`linkDetectionGroupStatistics`	Statistics for link failure detected per link detection group. Go to Show Table Address Context - Link Detection Group
`linkDetectionGroupStatus`	The status of a link detection group. Go to Show Table Address Context - Link Detection Group
`logicalSigAddressBindingStatus`	The collection of logical signaling address bindings Go to Show Table Address Context - Logical Signaling Address Binding Status
`natDirectMediaGroup`	Group of Signaling IP Addresses of NAT devices amongst which Direct media is supported Go to Show Table Address Context - NAT Direct Media Group
`realm`	A collection of IP endpoints identified by a unique name, where all IP endpoints are mutually reachable by means of IP routing without address translation Go to Show Table Address Context - Realm
`relayCurrentStatistics`	Relay count current statistics Go to Show Table Address Context - Relay Statistics
`relayIntervalStatistics`	Relay count interval statistics Go to Show Table Address Context - Relay Statistics
`relaySessionStats`	Relay session statistics Go to Show Table Address Context - Relay Statistics
`rtpServerTable`	This table is used to store a list of trusted RTP servers. Go to Show Table Address Context - RTP Server Table
`sipActiveGroupRegStatus`	This table presents the active SIP registration status for a list of SIP endpoints with unique id. Go to Show Table Address Context - SIP Registration Status
`sipActiveGroupRegSummaryStatus`	This table presents the active SIP registration status summary for a list of SIP endpoints. Go to Show Table Address Context - SIP Registration Status
`sipActiveRegisterNameStatus`	This table presents the active SIP registration status for a list of SIP endpoints. Go to Show Table Address Context - SIP Registration Status
`sipDeletedRegStatus`	This table presents the deleted SIP registration status for a list of SIP endpoints with unique id. Go to Show Table Address Context - SIP Registration Status
`sipDeletedRegisterNameStatus`	This table presents the deleted SIP registration status for a list of SIP endpoints. Go to Show Table Address Context - SIP Registration Status
`sipGeneratedSubscriptionStatus`	This table presents the active SIP subscription status for a list of SIP endpoints.
`sipRegCountDomainCurStats`	This table presents per-domain SIP registration statistics for the current statistics interval. Go to Show Table Address Context - SIP Registration Status
`sipRegCountDomainIntStats`	This table presents per-domain SIP registration interval statistics. Go to Show Table Address Context - SIP Registration Status
`sipRegCountDomainStats`	This table presents registration statistics on a per domain basis. Go to Show Table Address Context - SIP Registration Status
`sipRegCountStatistics`	This table presents SIP registration count statistics for the SIP endpoints. Go to Show Table Address Context - SIP Registration Status
`sipSubCountStatistics`	This table presents SIP relayed subscription count statistics for the SIP endpoints Go to Show Table Address Context - SIP Subscription Status
`sipSubscriptionCountStatistics`	This table presents SIP subscription count statistics for the SIP endpoints. Go to Show Table Address Context - SIP Subscription Status
`sipSubscriptionStatus`	This table presents the active SIP subscription status for a list of SIP endpoints. Go to Show Table Address Context - SIP Subscription Status
`staticRoute`	Static IP routes for this address context. Go to Show Table Address Context - Static Route
`surrRegCountStatistics`	This table presents Surrogate registration count statistics for the SIP endpoints. Go to Show Table Address Context - Surrogate Registration Count Statistics
`zone`	Signaling, media, and control for a zone in the address context. Go to Show Table Address Context - Zone
`zoneCurrentStatistics`	The Zone Statistics Current table. Go to Show Table Address Context - Zone
`zoneIntervalStatistics`	The Zone Statistics Interval table. Go to Show Table Address Context - Zone
`zoneStatus`	The current status for zones in this address context. Go to Show Table Address Context - Zone
`Beep Tone Inserted`	Indicates whether beep tone is played during the call. Value is "yes/no".

Command Examples

show table addressContext default ipAccessControlList getAggrPolicers

> show table addressContext default ipAccessControlList getAggrPolicers
POLPOLICINGZONEPOLICING BUCKET PACKETPACKET
ID TYPEIDMODE SIZECREDIT RATEACCEPTDISCARDAGG POL NAME
----------------------------------------------------------------------------------------
1ACL - DataPktRate50 pkt50000 pkt/s25760
2ACL - DataPktRate50 pkt1000 pkt/s 12360OAM
3ACL - PktRate50 pkt100 pkt/s0 0ICMP
65 ACL - PktRate50 pkt1000 pkt/s 29070 0OAM
66 ACL - PktRate50 pkt10000 pkt/s47447 0SFTP

67 ACL - PktRate50 pkt2500 pkt/s 214 0RBA
68 ACL - PktRate50 pkt100 pkt/s0 0ICMP
69 ACL - PktRate50 pkt20000 pkt/s0 0OPERATOR
70 Zone1 Bypass 0 00 0ZONE AGGREGATE
71 ACL - PktRate50 pkt750 pkt/s0 0IKE
72 Zone1000Bypass 0 0870ZONE AGGREGATE
73 Zone1001Bypass 0 0890ZONE AGGREGATE

show table addressContext default staticRoute

> show table addressContext default staticRoute
IP
INTERFACEIP
DESTINATION GROUPINTERFACE
IP ADDRESS PREFIXNEXT HOP NAME NAMEPREFERENCE
---------------------------------------------------------------------
10.54.36.583210.54.154.1IF1pkt_a_v4v6100
10.54.36.803210.54.155.1IF2pkt_b_v4v6100

show table addressContext default sipGeneratedSubscriptionStatus

> show table addressContext default sipGeneratedSubscriptionStatus
REGISTRAREXT
 PACKAGEIP EXPIRATIONSUBSCRIPTIONDOMAIN
ID NAME ADDRESSTIMESTATE NAME
----------------------------------------------------------
516 REG-EVENT 0.0.0.03660activeegress.com

show table addressContext default sipSubscriptionCountStatistics

> show table addressContext default sipSubscriptionCountStatistics
 SIP SIP SIP
 SUBSCRIPTIONSUBSCRIPTIONSIP SUBSCRIPTIONSIP
 COUNT COUNT SUBSCRIPTIONCOUNT SUBSCRIPTION
NAME ATTEMPTSSUCCESSFULCOUNT ACTIVEPENDING COUNT FAILED
-----------------------------------------------------------------------------
entry5 4 1 0 1

show table addressContext addr_1 dnsGroup DNSGrp1 dnsServerStatistics

TCP TCPTOTAL TCP CONNECTIONCONNECTIONTCP TCP EDNS EDNSINDEXIP ADDRESS QUERIESTIMEOUTSERRORSREFERRALSCONNECTIONFAILEDSUCCESS CONNECTIONTORNDOWNFALLBACKSTATUS FAILURES-------------------------------------------------------------------------------------------------------------------------------------------------110.54.78.2020 0 00 0 0 0 0 supported0

show table addressContext default zone ZONE_EGRESS sipTrunkGroup TG_ING media appSpecificBandwidth

> show table addressContext default zone ZONE_EGRESS sipTrunkGroup TG_ING media appSpecificBandwidth
appSpecificBandwidth enabled;

Space shortcuts

Page tree

Address Context

Command Syntax

Command Parameters

Command Examples