In this section:
Use this object to configure Backward Call Indicator (BCI) for Egress IP attributes.
To View and Edit Bci
On SBC main screen, go to Configuration > System Provisioning > Category: Trunk Provisioning > Ip Signaling Profile > Egress Ip Attributes > Bci. The Bci window is displayed.
DEFAULT_H323
On the Bci window, choose the Ip Signaling Profile as DEFAULT_H323 to view the Bci fields for H323 Trunk Group.
Trunk Provisioning - Egress Ip Attributes H323 Bci
The following fields are displayed:
Egress Ip Attributes H323 Bci Parameters
Parameter | Description |
|---|---|
Bci Interwork Encountered | Enable flag to indicate that ISUP is interworking with a network which is not capable of providing as many services as ISUP does. ISUP networks will therefore not employ certain features they otherwise normally would, including potentially the use of ISDN cause codes in failure conditions. The options are:
|
Bci Isdn Addess | Enable flag to enable ISDN Address in the BCI parameter of backward SS7 messages (e.g. ACM or ANM). The options are:
|
DEFAULT_SIP
On the Bci window, choose the Ip Signaling Profile as DEFAULT_SIP to view the Bci fields for SIP Trunk Group.
Trunk Provisioning - Egress Ip Attributes SIP Bci
The following fields are displayed:
Egress Ip Attributes SIP Bci Parameters
Parameter | Description |
|---|---|
Bci Interwork Encountered | Enable flag to indicate that ISUP is interworking with a network which is not capable of providing as many services as ISUP does. ISUP networks will therefore not employ certain features they otherwise normally would, including potentially the use of ISDN cause codes in failure conditions. The options are:
|
Bci Isdn Addess | Enable flag to enable ISDN Address in the BCI parameter of backward SS7 messages (e.g. ACM or ANM). The options are:
|
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.
Overview
Content Tools