In this section:
Use this window to create or edit Forwarders Data for a ENUM Domain Name object. An ENUM Domain Name contains an initial set of Forwarders Data when it is created. You can add additional sets of Forwarders Data to an ENUM Domain Name object using this window.
On the SBC main screen, go to All > Global > Servers > Enum Domain Name > Forwarders Data. The Forwarders Data window opens showing all configured Forwarders data. Select a ENUM Domain Name to work with Forwarders Data for a specific ENUM Domain Name.
Figure 1: Forwarders Data
To Create Forwarders Data
To create new Forwarders Data:
Choose the ENUM Domain Name to which you want to add the Forwarders in the ENUM Domain Name list.
Click New Forwarders Data. The Create New Forwarders Data window is displayed.
Use the following table to enter values and click Save.
Table 1: Forwarders Data Parameters
|
|
---|---|
Priority | Specifies the priority (order) of ENUM service execution. If this parameter is not set or set to the default of '129', default priorities are assigned for LNP (130), CNAM (131) and SIP AoR (132). If a different order of service execution is desired, set the priorities accordingly. For example, setting CNAM priority to 133 executes SIP AoR before CNAM. |
Forwarder IP | ENUM server IPv4 or IPv6 address of this Forwarder IP entry. |
Forwarder Description | Textual description for the forwarder IP address. |
Percentage Distribution | This option is only available when Load Distribution is set to Proportion for the ENUM Domain Name to which you are adding this Forwarders Data. Based on this value, the percentage of load distribution for each IP address in Zone ID is calculated. |
E DNS Type | Use this option to specify whether the ERE sends the eDNS OPT record. The options are: If this flag is set to
|
E DNS Buffer Size | Use this option to specify the E DNS buffer size used in the OPT record when the E DNS Type is set to Yes. If this parameter is configured as any value other than zero, the OPT record uses the value. Set this parameter to zero to have the OPT record use the global E DNS buffer size. |
To Edit Forwarders Data
To edit Forwarders Data:
To copy Forwarders Data:
To delete Forwarders Data: