You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Back to Table of Contents

In this section:

Related articles:

To configure this feature, perform the following steps:

Configuring Path Check for IP Address or FQDN

For IP Address

% set profiles services pathCheckProfile PATH1 protocol sipOptions sendInterval 60 replyTimeoutCount 1 recoveryCount 1
% set addressContext default zone ZONE_AS ipPeer PEER_AS ipAddress 10.54.80.94 ipPort 6274
% set addressContext default zone ZONE_AS ipPeer PEER_AS pathCheck profile PATH1 state enabled

For FQDN

% set profiles services pathCheckProfile PATH1 protocol sipOptions sendInterval 60 replyTimeoutCount 1 recoveryCount 1
% set addressContext default zone ZONE_AS ipPeer PEER_AS1 policy sip fqdn abc.sonusnet.com fqdnPort 6274
% set addressContext default zone ZONE_AS ipPeer PEER_AS1 pathCheck profile PATH1 hostName abc.sonusnet.com hostPort 6274 state enabled

Configuring IP Signaling Profile

% set addressContext default zone ZONE_AS sipTrunkGroup TG_SIPART_AS policy signaling ipSignalingProfile DEFAULT_SIP

Configuring the Internal Expires Timer

% set addressContext default zone ZONE_1 sipTrunkGroup TG1 signaling registration insideExpiresMinimum 3600

Configuring Registrar Recovery flags in IP Signaling Profile

% set profiles signaling ipSignalingProfile DEFAULT_SIP commonIpAttributes registrarRecovery registerToAlternateOnPrimaryDown enable revertToPrimaryOnRecovery enable deRegisterAlternateOnPrimaryRecovery enable overrideInternalExpiresTimer enable
  • No labels