Use this object to define ingress IP prefixes. Up to 128 ingressIpPrefix
entries may be assigned to a SIP trunk group. Ingress peers matching these ingress IP prefixes are assigned to the specified SIP trunk group.
Command Syntax
% set addressContext <name> zone <name> sipTrunkGroup <name> ingressIpPrefix <IP address + prefix>
Command Parameters
SIP Trunk Group Ingress IP Prefix Parameters
Parameter | Description |
---|
ingressIpPrefix | The ingress peers matching this ingress IP and prefix will be assigned to this SIP trunk group. Enter IPv4 or IPv6 address in the following format:IPv4 – Specifies the V4 IP address in dotted decimal form (for example 10.11.12.0 24).IPv6 – The V6 IP address in hexadecimal/colon form (for example, fd00:21:445:128::7880 64).prefixLength – The number of bits in the address which form the network part of the IP address. The remaining bits (128 – prefix length) specify the host part of the IP address. (range: 0-128).
|