Introduction
Use the following parameters to configure encoding and framing settings for all T1 ports.
T1-Common Setting
Parameter | Description |
---|---|
SIP-SERVER-IP | (READ ONLY) Indicates the IP of the SIP server (SWE Edge SIP IP - 169.254.1.120) to which all SIP/IP requests will be sent if the PRI feature is enabled on the interface. |
Framing Mode | Specifies either T1 or E1. Framing Mode Defines the number of frames that are grouped together for T1.
The options are F24-ESF and F12-D3-D4. |
Line-Encoding | Defines the bit encoding method used while transmitting data over the line. B8ZS (Bipolar 8 bit zero substitution) and AMI (Alternative Mark The options are B8Z2 and AMI. |
Overview
Content Tools