In this section:
This section describes Transaction Language 1 (TL1) commands related to Message Transfer Part Level 3 (MTP3).
Verbs and modifiers are separated by hyphens ( - ), attribute fields (TID, AID, CTAG, and General Block) are separated by colons (:), and every command is terminated by a semicolon (;).
Any attribute that contains TL1 special characters [ equal signs ( = ), colons ( : ), dashes ( - ), and commas ( , ) ] should be enclosed in double quotes ( " ) to help the attribute values escape.
Refer to Input Command Structure for more information.
The following figure lists the MTP3 objects that can be configured using TL1 commands.
MTP3 Object Groupings
This section includes information for the GTT command set information.
VFY-NAMGR:::[CTAG];
CHG-NAMGR:::[CTAG]:::::[NA_DBG_LEVEL=<int>],[LDL_DBG_LEVEL=<int>],[SCTP_DBG_LEVEL=<int>],[LDL_SCTP_DBG_LEVEL=<int>],[TELEDIAG=<LoggingFeature>],[MSUQ=<int>],[TIME_CONG1=<Timer>],[TIME_CONG2=<Timer>],[TIME_CONG3=<Timer>];
SET-NAMGR:::[CTAG]:::[RESTORE_DBG/DROPDRE];
:::<NA_DBG_LEVEL=int>,<LDL_DBG_LEVEL=int>,<SCTP_DBG_LEVEL=int>,<LDL_SCTP_DBG_LEVEL=int>,<TELEDIAG=LoggingFeature>,<MSUQ=int>,<TIME_CONG1=Timer>,<TIME_CONG2=Timer>,<TIME_CONG3=Timer>;
Attribute Details
DLT-NA::[<MTP3 NA/Network Appearance>]:[CTAG];
ADD-NA::[<MTP3 NA/Network Appearance>]:[CTAG];
CHG-NA::[<MTP3 NA/Network Appearance>]:[CTAG]:::::[LOCAL_PC=<pointcode>],[SS7_NODETYPE=<NodeType>],[SS7_VARIANT=<PersCode>],[PC_DISPLAY=<string>],[PC_ROUTING=<string>],[NET_IND=<NetId>],[CLLI=<string>],[SLSSIZE=<SLSSize>],[ROTATESLS=<Feature>],[SLS_IGNBIT=<SLSIgnoreBit>],[SLS_LSSELECTBIT=<SLSLinksetSelectBit>],[MAX_ECR=<int>],[GENUPU=<Feature>],[LCLMTPRSTSUP=<Feature>],[PCNUMVALID=<Feature>],[SPARESSFBITS=<SpareSSFBits>],[NI_USER_OVERRIDE=<Feature>],[M2PADFTVER=<M2paDefaultVersion>],[LOADSHARE_MODE=<LoadsharingMode>],[SISLT=<SIForSlt>],[SLTMPATTERN=<string>],[MSUSIZE=<MsuSize>],[LONGMSUINTERVAL=<IntervalMinutes>],[LONGMSUTRAPS=<MaxTrapGen>],[APPIDMGMT=<ApplicationIDMgmt>],[GENERATETFM=<Feature>],[DISCMSUDPCOPC=<Feature>],[ALARMSACTIVATE=<Feature>],[SCREENMGMTMSU=<Feature>],[VNDFEAT=<Feature>],[ROUTINGFEAT=<Feature>],[R4_8COMPL=<Feature>],[CONF_REQUEST=<Feature>],[DBGFEAT=<Feature>],[DBGERR=<LoggingFeature>],[DBGSNMMGMT=<LoggingFeature>],[DBGPEERADM=<LoggingFeature>],[DBGL2CON=<LoggingFeature>],[DBGDRECON=<LoggingFeature>],[DBGDREADM=<LoggingFeature>],[DBGDRESWTCH=<LoggingFeature>],[DBGSETUP=<LoggingFeature>],[DBGOTIMERS=<LoggingFeature>],[DBGREROUTPROC=<LoggingFeature>],[DBGCO_CBPROC=<LoggingFeature>],[DBGLINKSTATUS=<LoggingFeature>],[DBGL2MSG=<LoggingFeature>],[DBGUSRMGMT=<LoggingFeature>],[DBGUSRPRIM=<LoggingFeature>],[DBGMSU=<LoggingFeature>],[DBGMSURAW=<LoggingFeature>],[DBGSLT=<LoggingFeature>],[DBGSLSTABLES=<LoggingFeature>],[L3T1=<Timer>],[L3T2=<Timer>],[L3T3=<Timer>],[L3T4=<Timer>],[L3T5=<Timer>],[L3T6=<Timer>],[L3T7=<Timer>],[L3T8=<Timer>],[L3T10=<Timer>],[L3T11=<Timer>],[L3T12=<Timer>],[L3T13=<Timer>],[L3T14=<Timer>],[L3T15=<Timer>],[L3T16=<Timer>],[L3T17=<Timer>],[L3T18=<Timer>],[L3T19=<Timer>],[L3T20=<Timer>],[L3T21=<Timer>],[L3T22=<Timer>],[L3T23=<Timer>],[L3T24=<Timer>],[L3T25=<Timer>],[L3T26=<Timer>],[L3T27=<Timer>],[L3T28=<Timer>],[L3T29=<Timer>],[L3T30=<Timer>],[L3T31=<Timer>],[L3T32=<Timer>],[L3T33=<Timer>],[L3T34=<Timer>],[TXLIST=<XLifeTimer>],[T19NOTIF=<Feature>],[T19LRESET=<Feature>],[T19ATTMPTS=<L3FailedLinkCraftRefTimer>],[T31FLINKCONG=<L3FalseLinkCongestionTimer>],[CRDTSUPPORT=<Feature>],[CRDTN=<int>],[CRDTM=<int>],[CRDTTLOOP=<Seconds>],[NTTUSNSUPPORT=<Feature>];
SET-NA::[<MTP3 NA/Network Appearance>]:[CTAG]:::[ACT/DEACT/RESTORE_DBG/DUMP];
VFY-NA::[<MTP3 NA/Network Appearance>]:[CTAG]::::::[<searchedAttrKey1=Value1>][,<searchedAttrKey2=Value2>]…[,<searchedAttrKeyN=ValueN>];
::[<MTP3 NA/Network Appearance>]:<CONTEXT=string>,<LOCAL_PC=pointcode>,<SS7_NODETYPE=NodeType>,<SS7_VARIANT=PersCode>,<PC_DISPLAY=string>,<PC_ROUTING=string>,<NET_IND=NetId>,<STATUS=epx_node_status>,<CLLI=string>,<NA=int>,<RXMSU=int>,<TXMSU=int>,<ACTV_SNMSLOT=int>,<SLSSIZE=SLSSize>,<ROTATESLS=Feature>,<SLS_IGNBIT=SLSIgnoreBit>,<SLS_LSSELECTBIT=SLSLinksetSelectBit>,<MAX_ECR=int>,<GENUPU=Feature>,<LCLMTPRSTSUP=Feature>,<PCNUMVALID=Feature>,<SPARESSFBITS=SpareSSFBits>,<NI_USER_OVERRIDE=Feature>,<M2PADFTVER=M2paDefaultVersion>,<LOADSHARE_MODE=LoadsharingMode>,<SISLT=SIForSlt>,<SLTMPATTERN=string>,<MSUSIZE=MsuSize>,<LONGMSUINTERVAL=IntervalMinutes>,<LONGMSUTRAPS=MaxTrapGen>,<APPIDMGMT=ApplicationIDMgmt>,<GENERATETFM=Feature>,<DISCMSUDPCOPC=Feature>,<ALARMSACTIVATE=Feature>,<MTP4CXPORT=int>,<MATESTP=pointcode>,<VNDFEAT=Feature>,<ROUTINGFEAT=Feature>,<R4_8COMPL=Feature>,<CONF_REQUEST=Feature>,<DBGFEAT=Feature>,<DBGERR=LoggingFeature>,<DBGSNMMGMT=LoggingFeature>,<DBGPEERADM=LoggingFeature>,<DBGL2CON=LoggingFeature>,<DBGDRECON=LoggingFeature>,<DBGDREADM=LoggingFeature>,<DBGDRESWTCH=LoggingFeature>,<DBGSETUP=LoggingFeature>,<DBGOTIMERS=LoggingFeature>,<DBGREROUTPROC=LoggingFeature>,<DBGCO_CBPROC=LoggingFeature>,<DBGLINKSTATUS=LoggingFeature>,<DBGL2MSG=LoggingFeature>,<DBGUSRMGMT=LoggingFeature>,<DBGUSRPRIM=LoggingFeature>,<DBGMSU=LoggingFeature>,<DBGMSURAW=LoggingFeature>,<DBGSLT=LoggingFeature>,<DBGSLSTABLES=LoggingFeature>,<L3T1=Timer>,<L3T2=Timer>,<L3T3=Timer>,<L3T4=Timer>,<L3T5=Timer>,<L3T6=Timer>,<L3T7=Timer>,<L3T8=Timer>,<L3T10=Timer>,<L3T11=Timer>,<L3T12=Timer>,<L3T13=Timer>,<L3T14=Timer>,<L3T15=Timer>,<L3T16=Timer>,<L3T17=Timer>,<L3T18=Timer>,<L3T19=Timer>,<L3T20=Timer>,<L3T21=Timer>,<L3T22=Timer>,<L3T23=Timer>,<L3T24=Timer>,<L3T25=Timer>,<L3T26=Timer>,<L3T27=Timer>,<L3T28=Timer>,<L3T29=Timer>,<L3T30=Timer>,<L3T31=Timer>,<L3T32=Timer>,<L3T33=Timer>,<L3T34=Timer>,<TXLIST=XLifeTimer>,<T19NOTIF=Feature>,<T19LRESET=Feature>,<T19ATTMPTS=L3FailedLinkCraftRefTimer>,<T31FLINKCONG=L3FalseLinkCongestionTimer>,<CRDTSUPPORT=Feature>,<CRDTN=int>,<CRDTM=int>,<CRDTTLOOP=Seconds>,<NTTUSNSUPPORT=Feature>;
Network Appearance - Position 1
Type: int
Description: Signaling Node Network Appearance (NA) Identifier is a number that uniquely identifies the Network Appearance (or MTP Stack with its own LPC) within the system.
VFY-DRES::[<MTP3 NA/Network Appearance>]:[CTAG];
::[<MTP3 NA/Network Appearance>]:<COUNT=int>;
COUNT - Count
Permissions: Read-only
Type: int
Description: Number of DREs
DLT-DRE::[<MTP3 NA/Network Appearance>]-[<DRE/DRE ID>]:[CTAG];
ADD-DRE::[<MTP3 NA/Network Appearance>]-[<DRE/DRE ID>]:[CTAG];
CHG-DRE::[<MTP3 NA/Network Appearance>]-[<DRE/DRE ID>]:[CTAG]:::::[CLLI=<string>],[IPADDR1=<string>],[IPADDR2=<string>];
SET-DRE::[<MTP3 NA/Network Appearance>]-[<DRE/DRE ID>]:[CTAG]:::[AUDIT/RESET];
VFY-DRE::[<MTP3 NA/Network Appearance>]-[<DRE/DRE ID>]:[CTAG];::::::[<searchedAttrKey1=Value1>][,<searchedAttrKey2=Value2>]…[,<searchedAttrKeyN=ValueN>];
::[<MTP3 NA/Network Appearance>]-[<DRE/DRE ID>]:<CLLI=string>,<STATE=AvailState>,<IPADDR1=string>,<IPADDR2=string>;
DRE ID - Position 1
Type: int(Range: [1..64])
Description: A unique identifier for the DRE object. The ID is set at creation time and cannot be modified after that. The Distributed Routing Engine (DRE) is the process that implements the signaling message handling portion of the MTP Level 3 (MTP3). This process works closely with Signaling Network Management (SNM) to provide MTP Level 3 functionality. The DRE provides most of the message routing, while the SNM manages links, routes, the associated Signaling Link Selection (SLS) tables, and the user interface for configuration. In most cases there is one DRE and one SNM per slot, however some configurations may have a number of remote DRE processes reporting back to a central SNM.
VFY-L2CS::[<MTP3 NA/Network Appearance>]:[CTAG];
::[<MTP3 NA/Network Appearance>]:<COUNT=int>;
COUNT - Count
Permissions: Read-only
Type: int
Description: Number of L2 Connections
DLT-L2C::[<MTP3 NA/Network Appearance>]-[<L2 Connection/Cage ID>-<L2 Connection/DRE ID>-<L2 Connection/Type>-<L2 Connection/MTP2 Protocol Type>]:[CTAG];
ADD-L2C::[<MTP3 NA/Network Appearance>]-[<L2 Connection/Cage ID>-<L2 Connection/DRE ID>-<L2 Connection/Type>-<L2 Connection/MTP2 Protocol Type>]:[CTAG];
CHG-L2C::[<MTP3 NA/Network Appearance>]-[<L2 Connection/Cage ID>-<L2 Connection/DRE ID>-<L2 Connection/Type>-<L2 Connection/MTP2 Protocol Type>]:[CTAG]:::::[CAGENAME=<string>],[LOCAL_IPADDR1=<string>],[LOCAL_IPADDR2=<string>],[LOCAL_L2PORT=<int>],[REMOTE_IPADDR1=<string>],[REMOTE_IPADDR2=<string>],[REMOTE_L2PORT=<int>],[HB=<Feature>],[HB_INV=<int>],[RTO_INIT=<int>],[RTO_MIN=<int>],[RTO_MAX=<int>],[MX_PATH_RETRANS=<int>],[MX_ASSOC_RETRANS=<int>],[BUNDLING=<Feature>],[BUNDLING_TO=<int>],[DELAYACK_TO=<int>],[FAST_RETRANS_TH=<int>],[SCTP_DBG_LVL=<int>],[CONTIMEOUT=<Timer>],[CONRETRY=<Timer>],[CMDTIMEOUT=<Timer>],[CMDRETRY=<Timer>],[M2UA_VARIANT=<M2UAFlavour>];
SET-L2C::[<MTP3 NA/Network Appearance>]-[<L2 Connection/Cage ID>-<L2 Connection/DRE ID>-<L2 Connection/Type>-<L2 Connection/MTP2 Protocol Type>]:[CTAG]:::[ACT/DEACT];
VFY-L2C::[<MTP3 NA/Network Appearance>]-[<L2 Connection/Cage ID>-<L2 Connection/DRE ID>-<L2 Connection/Type>-<L2 Connection/MTP2 Protocol Type>]:[CTAG];::::::[<searchedAttrKey1=Value1>][,<searchedAttrKey2=Value2>]…[,<searchedAttrKeyN=ValueN>];
::[<MTP3 NA/Network Appearance>]-[<L2 Connection/Cage ID>-<L2 Connection/DRE ID>-<L2 Connection/Type>-<L2 Connection/MTP2 Protocol Type>]:<CAGENAME=string>,<STATE=AvailState>,<MTP2VERSION=int>,<LOCAL_IPADDR1=string>,<LOCAL_IPADDR2=string>,<LOCAL_L2PORT=int>,<REMOTE_IPADDR1=string>,<REMOTE_IPADDR2=string>,<REMOTE_L2PORT=int>,<ASSOCNUM=int>,<HB=Feature>,<HB_INV=int>,<RTO_INIT=int>,<RTO_MIN=int>,<RTO_MAX=int>,<MX_PATH_RETRANS=int>,<MX_ASSOC_RETRANS=int>,<BUNDLING=Feature>,<BUNDLING_TO=int>,<DELAYACK_TO=int>,<FAST_RETRANS_TH=int>,<CHECKSUM=SCTPCheckSum>,<SCTP_DBG_LVL=int>,<CONTIMEOUT=Timer>,<CONRETRY=Timer>,<CMDTIMEOUT=Timer>,<CMDRETRY=Timer>,<M2UA_VARIANT=M2UAFlavour>;
Cage ID - Position 1
Type: int(Range: [0..127])
Description: Cage identifier as per Hardware Manager definition. The value given here must correspond to the value specified when the Hardware Manager was configured. The 6301 and 4301 systems will come configured with L2 Connections for the available slots in the chassis. The Cage Ids are listed by slot number as 4-9. On other systems, typically one L2 module is preconfigured and it is listed as Cage Id 1.
DRE ID - Position 2
Type: int(Range: [1..64])
Description: DRE to manage the L2 Connection. This value is specified at creation time of the L2 Connection, and cannot be modified thereafter.
Type - Position 3
Type: L2ModuleType={HWM_SCTP,TCP,ATM,LOCAL DEVICE,TIPC}
Description: L2 Connection communications with the DRE can be handled over TCP/IP, SCTP/IP, ATM or the DRE and L2 can be local to each other. SCTP is a telecom specific protocol similar to TCP. SCTP has certain features for guaranteed delivery of packets and sequencing, making it a better choice for this purpose. The protocol used by default is HWM_SCTP, unless you are working on a one card (blade) system. The values for Type, MTP2 Protocol Type, and MTP2 Protocol Version are related. These are layers in a protocol between the DRE and the Level 2 modules.
MTP2 Protocol Type - Position 4
Type: L2ModuleProtocol={PROPRIETARY,M2UA,ATM_PROPRIETARY}
Description: The Internal Protocol API is used to interact with this L2 Connection is either M2UA or a proprietary protocol from Ribbon. M2UA requires that the L2 Connection Communications Type be SCTP. The values for Type, MTP2 Protocol Type, and MTP2 Protocol Version are related. These are layers in a protocol between the DRE and the Level 2 modules.
DLT-VND::[<MTP3 NA/Network Appearance>]-[<VNode/VPC>]:[CTAG];
ADD-VND::[<MTP3 NA/Network Appearance>]-[<VNode/VPC>]:[CTAG];
CHG-VND::[<MTP3 NA/Network Appearance>]-[<VNode/VPC>]:[CTAG]:::::[CLLI=<string>],[DESC=<string>],[TFA=<Feature>],[TFP=<Feature>],[TFR=<Feature>],[MATE_DIST=<Feature>];
SET-VND::[<MTP3 NA/Network Appearance>]-[<VNode/VPC>]:[CTAG]:::[ACT/DEACT];
VFY-VND::[<MTP3 NA/Network Appearance>]-[<VNode/VPC>]:[CTAG]::::::[<searchedAttrKey1=Value1>][,<searchedAttrKey2=Value2>]…[,<searchedAttrKeyN=ValueN>];
::[<MTP3 NA/Network Appearance>]-[<VNode/VPC>]:<CLLI=string>,<DESC=string>,<STATE=ActivationState>,<TFA=Feature>,<TFP=Feature>,<TFR=Feature>,<MATE_DIST=Feature>;
VPC - Position 1
Type: pointcode
Description: The SS7 point code of this virtual node in the format Network.Cluster.Member. Maximum value is 255.255.255. If the personality is ITU, the format is Zone.Area.Member and the range for Zone and Member is 0 to 7, Area is 0 to 255.
DLT-RTESETTBL::[<MTP3 NA/Network Appearance>]-[<Routeset List/Name>]:[CTAG];
ADD-RTESETTBL::[<MTP3 NA/Network Appearance>]-[<Routeset List/Name>]:[CTAG];
SET-RTESETTBL::[<MTP3 NA/Network Appearance>]-[<Routeset List/Name>]:[CTAG]:::[DUMP];
VFY-RTESETTBL::[<MTP3 NA/Network Appearance>]-[<Routeset List/Name>]:[CTAG]::::::[<searchedAttrKey1=Value1>][,<searchedAttrKey2=Value2>]…[,<searchedAttrKeyN=ValueN>];
::[<MTP3 NA/Network Appearance>]-[<Routeset List/Name>]:<COUNT=int>,<ID=int>;
Name - Position 1
Type: string
Description: The name of the Routeset List. This name is used to reference the Routeset List from a linkset. It must be unique among the Routeset Lists within the NA. It must consist of at most eight alphanumeric characters. Alphabetic characters must be uppercase.
DLT-RTESET::[<MTP3 NA/Network Appearance>]-[<Routeset List/Name>]-[<Routeset/DPC>-<Routeset/Destination Type>]:[CTAG];
ADD-RTESET::[<MTP3 NA/Network Appearance>]-[<Routeset List/Name>]-[<Routeset/DPC>-<Routeset/Destination Type>]:[CTAG];
CHG-RTESET::[<MTP3 NA/Network Appearance>]-[<Routeset List/Name>]-[<Routeset/DPC>-<Routeset/Destination Type>]:[CTAG]:::::[CLLI=<string>],[TCA=<Feature>],[TCP=<Feature>],[TCR=<Feature>],[TFA=<Feature>],[TFP=<Feature>],[TFR=<Feature>],[CNGSTNOTIFUPS=<int>],[ALWXRTST=<Feature>],[RSID=<RoutesetID>],[LOADSHARE_MODE=<RSLoadShareMode>],[ALARMS=<Feature>];
SET-RTESET::[<MTP3 NA/Network Appearance>]-[<Routeset List/Name>]-[<Routeset/DPC>-<Routeset/Destination Type>]:[CTAG]:::[ACT/DEACT/TEST/DUMPSLSTBL/CRDT];
VFY-RTESET::[<MTP3 NA/Network Appearance>]-[<Routeset List/Name>]-[<Routeset/DPC>-<Routeset/Destination Type>]:[CTAG]::::::[<searchedAttrKey1=Value1>][,<searchedAttrKey2=Value2>]…[,<searchedAttrKeyN=ValueN>];
::[<MTP3 NA/Network Appearance>]-[<Routeset List/Name>]-[<Routeset/DPC>-<Routeset/Destination Type>]:<CLLI=string>,<STATE=RoutesetState>,<CNGSTLVL=CongestionLevel>,<DESTSTATE=DestState>,<TCA=Feature>,<TCP=Feature>,<TCR=Feature>,<TFA=Feature>,<TFP=Feature>,<TFR=Feature>,<CNGSTNOTIFUPS=int>,<ALWXRTST=Feature>,<TESTSTATE=SLT>,<RSID=RoutesetID>,<LOADSHARE_MODE=RSLoadShareMode>,<ALARMS=Feature>;
DPC - Position 1
Type: pointcode
Description: Destination SS7 point code of this routeset This value should be set a creation time of the routeset and cannot be modified thereafter. The point code of the routeset gives the destination that one is seeking. The routes within the routeset will indicate the adjacent point codes that can be used to the get to the destination.
Destination Type - Position 2
Type: DestType={DEFAULT,NETWORK,CLUSTER,MEMBER}
Description: Describes the destination type of the routeset (network, cluster, member, or default).
RSID - Routeset ID
Type: RoutesetID={UNDEFINED, 0 to 4000}
Description: Filter by Routeset ID. Set to UNDEFINED to display all records.
DLT-RTE::[<MTP3 NA/Network Appearance>]-[<Routeset List/Name>]-[<Routeset/DPC>-<Routeset/Destination Type>]-[<Route/APC>]:[CTAG];
ADD-RTE::[<MTP3 NA/Network Appearance>]-[<Routeset List/Name>]-[<Routeset/DPC>-<Routeset/Destination Type>]-[<Route/APC>]:[CTAG]:::::[COST=<int>];
CHG-RTE::[<MTP3 NA/Network Appearance>]-[<Routeset List/Name>]-[<Routeset/DPC>-<Routeset/Destination Type>]-[<Route/APC>]:[CTAG]:::::[COST=<int>];
SET-RTE::[<MTP3 NA/Network Appearance>]-[<Routeset List/Name>]-[<Routeset/DPC>-<Routeset/Destination Type>]-[<Route/APC>]:[CTAG]:::[RESETSTATE];
VFY-RTE::[<MTP3 NA/Network Appearance>]-[<Routeset List/Name>]-[<Routeset/DPC>-<Routeset/Destination Type>]-[<Route/APC>]:[CTAG]::::::[<searchedAttrKey1=Value1>][,<searchedAttrKey2=Value2>]…[,<searchedAttrKeyN=ValueN>];
::[<MTP3 NA/Network Appearance>]-[<Routeset List/Name>]-[<Routeset/DPC>-<Routeset/Destination Type>]-[<Route/APC>]:<LINKSETNAME=string>,<COST=int>,<CLLI=string>,<STATE=RouteState>;
APC - Position 1
Type: pointcode
Description: Adjacent SS7 point code of this route.
VFY-LSS::[<MTP3 NA/Network Appearance>]:[CTAG];
SET-LSS::[<MTP3 NA/Network Appearance>]:[CTAG]:::[RESET_IMF];
::[<MTP3 NA/Network Appearance>]:<COUNT=int>;
COUNT - Count
Permissions: Read-only
Type: int
Description: Number of Linksets
DLT-LS::[<MTP3 NA/Network Appearance>]-[<Linkset/APC>]:[CTAG];
ADD-LS::[<MTP3 NA/Network Appearance>]-[<Linkset/APC>]:[CTAG];
CHG-LS::[<MTP3 NA/Network Appearance>]-[<Linkset/APC>]:[CTAG]:::::[LINKT=<LinkType>],[ABPLANEBIT=<ABPlaneBit>],[LINKSETNAME=<string>],[CLLI=<string>],[ROTATESLS=<Feature>],[REVROTATESLS=<Feature>],[RMMTPRSTSUP=<Feature>],[RTSTNAME=<string>],[IMF=<Feature>],[ALARMS=<Feature>],[PCMAPPING=<string>],[SCREENMGMTMSU=<Feature>],[TCA=<Feature>],[TCP=<Feature>],[TCR=<Feature>],[TFA=<Feature>],[TFP=<Feature>],[TFR=<Feature>],[NI=<NetIdLS>],[SISLT=<LS_SIForSlt>],[SLTMPATTERN=<string>],[RPTSLT=<Feature>],[OPC_VERIFICATION=<opcVerification>],[LONG_MSU_SUPPORT=<Feature>],[LONG_MSU_PROVING=<Feature>],[SCTP_CLIENT=<Feature>],[M3UA_CLIENT=<Feature>],[M3UA_MG_SPC=<Feature>],[M3UA_SSNM_MSGS=<Feature>],[TXABTL1=<Percent10to100>],[TXONSTL1=<Percent10to100>],[TXABTL2=<Percent10to100>],[TXONSTL2=<Percent10to100>],[TXABTL3=<Percent10to100>],[TXONSTL3=<Percent10to100>],[M2PA_RXABT_BUSY=<int>],[M2PA_RXONST_BUSY=<int>],[M2PA_TXQSIZE=<int>],[M2PA_RTBSIZE=<int>],[LU_PERCT=<int>],[ERRCM=<ErrorCorrection>],[NAERM=<int>],[EAERM=<int>],[SUERM=<int>],[MXMSURTB=<int>],[MXOCTRTB=<int>],[HB=<Feature>],[HB_INV=<int>],[RTO_INIT=<int>],[RTO_MIN=<int>],[RTO_MAX=<int>],[MX_PATH_RETRANS=<int>],[MX_ASSOC_RETRANS=<int>],[BUNDLING=<Feature>],[BUNDLING_TO=<int>],[DELAYACK_TO=<int>],[FAST_RETRANS_TH=<int>],[BYTES_B4_ACK=<int>],[MSG_B4_ACK=<int>],[PROVING_MSG_SZ=<ProvingMsuSize>],[DSCP=<Dscp>],[L2T1=<Timer>],[ANNEXAT1=<Timer>],[L2T2=<Timer>],[L2T3=<Timer>],[L2T4e=<Timer>],[L2T4n=<Timer>],[ANNEXAT4N=<Timer>],[L2T5=<Timer>],[L2T6=<Timer>],[L2T7=<Timer>],[SLTMT1=<Timer>],[SLTMT2=<Timer>],[L3T1=<LinksetTimer>],[L3T2=<LinksetTimer>],[L3T3=<LinksetTimer>],[L3T4=<LinksetTimer>],[L3T6=<LinksetTimer>],[RFC4165_T1=<Timer>],[RFC4165_T2=<Timer>],[RFC4165_T3=<Timer>],[RFC4165_T4n=<Timer>],[RFC4165_T4e=<Timer>],[RFC4165_T6=<Timer>],[RFC4165_T7=<Timer>],[RFC4165_STATINV=<Timer>],[RFC4165_PROVRATE=<Timer>],[RFC4165_ACKINV=<Timer>],[DRAFTV6_T1=<Timer>],[DRAFTV6_T3=<Timer>],[DRAFTV6_T4n=<Timer>],[DRAFTV6_T4e=<Timer>],[DRAFTV6_T6=<Timer>],[DRAFTV6_T7=<Timer>],[DRAFTV6_STATINV=<Timer>],[DRAFTV6_PROVRATE=<Timer>],[DRAFTV6_ACKINV=<Timer>];
SET-LS::[<MTP3 NA/Network Appearance>]-[<Linkset/APC>]:[CTAG]:::[ACT/DEACT/SCTP_DEF/RESTORE_DBG];
VFY-LS::[<MTP3 NA/Network Appearance>]-[<Linkset/APC>]:[CTAG];
::[<MTP3 NA/Network Appearance>]-[<Linkset/APC>]:<LINKT=LinkType>,<ABPLANEBIT=ABPlaneBit>,<LINKSETNAME=string>,<CLLI=string>,<STATE=LinksetState>,<ROTATESLS=Feature>,<REVROTATESLS=Feature>,<RMMTPRSTSUP=Feature>,<RTSTNAME=string>,<IMF=Feature>,<ALARMS=Feature>,<PCMAPPING=string>,<USRACTV=Feature>,<TCA=Feature>,<TCP=Feature>,<TCR=Feature>,<TFA=Feature>,<TFP=Feature>,<TFR=Feature>,<NI=NetIdLS>,<SISLT=LS_SIForSlt>,<SLTMPATTERN=string>,<RPTSLT=Feature>,<OPC_VERIFICATION=opcVerification>,<LONG_MSU_SUPPORT=Feature>,<LONG_MSU_PROVING=Feature>,<SCTP_CLIENT=Feature>,<M3UA_CLIENT=Feature>,<M3UA_MG_SPC=Feature>,<TXABTL1=Percent10to100>,<TXONSTL1=Percent10to100>,<TXABTL2=Percent10to100>,<TXONSTL2=Percent10to100>,<TXABTL3=Percent10to100>,<TXONSTL3=Percent10to100>,<M2PA_RXABT_BUSY=int>,<M2PA_RXONST_BUSY=int>,<M2PA_TXQSIZE=int>,<M2PA_RTBSIZE=int>,<LU_PERCT=int>,<LU_MIN=int>,<LU_SEC=int>,<ERRCM=ErrorCorrection>,<NAERM=int>,<EAERM=int>,<SUERM=int>,<MXMSURTB=int>,<MXOCTRTB=int>,<HB=Feature>,<HB_INV=int>,<RTO_INIT=int>,<RTO_MIN=int>,<RTO_MAX=int>,<MX_PATH_RETRANS=int>,<MX_ASSOC_RETRANS=int>,<BUNDLING=Feature>,<BUNDLING_TO=int>,<DELAYACK_TO=int>,<FAST_RETRANS_TH=int>,<CHECKSUM=SCTPCheckSum>,<BYTES_B4_ACK=int>,<MSG_B4_ACK=int>,<PROVING_MSG_SZ=ProvingMsuSize>,<DSCP=int>,<L2T1=Timer>,<ANNEXAT1=Timer>,<L2T2=Timer>,<L2T3=Timer>,<L2T4e=Timer>,<L2T4n=Timer>,<ANNEXAT4N=Timer>,<L2T5=Timer>,<L2T6=Timer>,<L2T7=Timer>,<SLTMT1=Timer>,<SLTMT2=Timer>,<L3T1=LinksetTimer>,<L3T2=LinksetTimer>,<L3T3=LinksetTimer>,<L3T4=LinksetTimer>,<L3T6=LinksetTimer>,<RFC4165_T1=Timer>,<RFC4165_T2=Timer>,<RFC4165_T3=Timer>,<RFC4165_T4n=Timer>,<RFC4165_T4e=Timer>,<RFC4165_T6=Timer>,<RFC4165_T7=Timer>,<RFC4165_STATINV=Timer>,<RFC4165_PROVRATE=Timer>,<RFC4165_ACKINV=Timer>,<DRAFTV6_T1=Timer>,<DRAFTV6_T3=Timer>,<DRAFTV6_T4n=Timer>,<DRAFTV6_T4e=Timer>,<DRAFTV6_T6=Timer>,<DRAFTV6_T7=Timer>,<DRAFTV6_STATINV=Timer>,<DRAFTV6_PROVRATE=Timer>,<DRAFTV6_ACKINV=Timer>;
APC - Position 1
Type: pointcode
Description: Adjacent SS7 point code of this linkset.
VFY-LLMON::[<MTP3 NA/Network Appearance>]-[<Linkset/APC>]:[CTAG];
::[<MTP3 NA/Network Appearance>]-[<Linkset/APC>]:<MONITOR=Feature>,<SLC00RX=string>,<SLC00TX=string>,<SLC01RX=string>,<SLC01TX=string>,<SLC02RX=string>,<SLC02TX=string>,<SLC03RX=string>,<SLC03TX=string>,<SLC04RX=string>,<SLC04TX=string>,<SLC05RX=string>,<SLC05TX=string>,<SLC06RX=string>,<SLC06TX=string>,<SLC07RX=string>,<SLC07TX=string>,<SLC08RX=string>,<SLC08TX=string>,<SLC09RX=string>,<SLC09TX=string>,<SLC10RX=string>,<SLC10TX=string>,<SLC11RX=string>,<SLC11TX=string>,<SLC12RX=string>,<SLC12TX=string>,<SLC13RX=string>,<SLC13TX=string>,<SLC14RX=string>,<SLC14TX=string>,<SLC15RX=string>,<SLC15TX=string>;
VFY-SLK::[<MTP3 NA/Network Appearance>]-[<Linkset/APC>]-[<LS Link/SLC>]:[CTAG];
DLT-SLK::[<MTP3 NA/Network Appearance>]-[<Linkset/APC>]-[<LS Link/SLC>]:[CTAG];
ADD-SLK::[<MTP3 NA/Network Appearance>]-[<Linkset/APC>]-[<LS Link/SLC>]:[CTAG]::::LS;
CHG-SLK::[<MTP3 NA/Network Appearance>]-[<Linkset/APC>]-[<LS Link/SLC>]:[CTAG]::::LS:[CAGE=<int>],[CHASSIS_SLOT=<int>],[CHANNEL=<int>],[ALARMS=<Feature>],[L2_DBG_LVL=<int>];
SET-SLK::[<MTP3 NA/Network Appearance>]-[<Linkset/APC>]-[<LS Link/SLC>]:[CTAG]:::[ACT/DEACT/SET_LPO/CLR_LPO/INH/UNINH/RESET/INIT]:LS;
::[<MTP3 NA/Network Appearance>]-[<Linkset/APC>]-[<LS Link/SLC>]:<LINK_NAME=string>,<DRE_ID=int>,<CAGE=int>,<CHASSIS_SLOT=int>,<CHANNEL=int>,<L2_STATE=L2LinkState>,<L3_STATE=L3LinkState>,<CONGESTION_LVL=CongestionLevel>,<RXMSU=int>,<TXMSU=int>,<DIAG_MSG=string>,<ALARMS=Feature>,<USR_ACTIVATED=Feature>,<L2_DBG_LVL=int>;
SLC - Position 1
Type: int(Range: [0..15])
Description: Signaling Link Code for this link. If AB Plane Bit is set to A or B, valid values are 0-7. If AB Plane Bit is set to SLC ENCODED, valid values are 0-15.
DLT-SLK::[<MTP3 NA/Network Appearance>]-[<Linkset/APC>]-[<ATM Link/SLC>]:[CTAG];
ADD-SLK::[<MTP3 NA/Network Appearance>]-[<Linkset/APC>]-[<ATM Link/SLC>]:[CTAG]::::ATM;
CHG-SLK::[<MTP3 NA/Network Appearance>]-[<Linkset/APC>]-[<ATM Link/SLC>]:[CTAG]::::ATM:[CAGE=<int>],[CHANNEL=<int>],[ALARMS=<Feature>],[L2_DBG_LVL=<int>];
SET-SLK::[<MTP3 NA/Network Appearance>]-[<Linkset/APC>]-[<ATM Link/SLC>]:[CTAG]:::[ACT/DEACT/INH/UNINH/RESET/INIT]:ATM;
VFY-SLK::[<MTP3 NA/Network Appearance>]-[<Linkset/APC>]-[<ATM Link/SLC>]:[CTAG]::::ATM::[<searchedAttrKey1=Value1>][,<searchedAttrKey2=Value2>]…[,<searchedAttrKeyN=ValueN>];
VFY-SLK-ATM::[<MTP3 NA/Network Appearance>]-[<Linkset/APC>]-[<ATM Link/SLC>]:[CTAG]::::::[<searchedAttrKey1=Value1>][,<searchedAttrKey2=Value2>]…[,<searchedAttrKeyN=ValueN>];
::[<MTP3 NA/Network Appearance>]-[<Linkset/APC>]-[<ATM Link/SLC>]:<LINK_NAME=string>,<DRE_ID=int>,<CAGE=int>,<CHANNEL=int>,<L2_STATE=L2LinkState>,<L3_STATE=L3LinkState>,<CONGESTION_LVL=CongestionLevel>,<RXMSU=int>,<TXMSU=int>,<DIAG_MSG=string>,<ALARMS=Feature>,<USR_ACTIVATED=Feature>,<L2_DBG_LVL=int>;
SLC - Position 1
Type: int(Range: [0..15])
Description: Signaling Link Code for this link. Value of 0-15
DLT-SLK::[<MTP3 NA/Network Appearance>]-[<Linkset/APC>]-[<Annex A Link/SLC>]:[CTAG];
ADD-SLK::[<MTP3 NA/Network Appearance>]-[<Linkset/APC>]-[<Annex A Link/SLC>]:[CTAG]::::ANNEXA;
CHG-SLK::[<MTP3 NA/Network Appearance>]-[<Linkset/APC>]-[<Annex A Link/SLC>]:[CTAG]::::ANNEXA:[CAGE=<int>],[CHASSIS_SLOT=<int>],[CHANNEL=<int>],[ALARMS=<Feature>],[L2_DBG_LVL=<int>];
SET-SLK::[<MTP3 NA/Network Appearance>]-[<Linkset/APC>]-[<Annex A Link/SLC>]:[CTAG]:::[ACT/DEACT/SET_LPO/CLR_LPO/INH/UNINH/RESET/INIT]:ANNEXA;
VFY-SLK::[<MTP3 NA/Network Appearance>]-[<Linkset/APC>]-[<Annex A Link/SLC>]:[CTAG]::::ANNEXA::[<searchedAttrKey1=Value1>][,<searchedAttrKey2=Value2>]…[,<searchedAttrKeyN=ValueN>];
VFY-SLK-ANNEXA::[<MTP3 NA/Network Appearance>]-[<Linkset/APC>]-[<Annex A Link/SLC>]:[CTAG]::::::[<searchedAttrKey1=Value1>][,<searchedAttrKey2=Value2>]…[,<searchedAttrKeyN=ValueN>];
::[<MTP3 NA/Network Appearance>]-[<Linkset/APC>]-[<Annex A Link/SLC>]:<LINK_NAME=string>,<DRE_ID=int>,<CAGE=int>,<CHASSIS_SLOT=int>,<CHANNEL=int>,<L2_STATE=L2LinkState>,<L3_STATE=L3LinkState>,<CONGESTION_LVL=CongestionLevel>,<RXMSU=int>,<TXMSU=int>,<DIAG_MSG=string>,<USR_ACTIVATED=Feature>,<ALARMS=Feature>,<L2_DBG_LVL=int>;
SLC - Position 1
Type: int(Range: [0..15])
Description: Signaling Link Code for this link. Value of 0-15
DLT-SLK::[<MTP3 NA/Network Appearance>]-[<Linkset/APC>]-[<M2UA Link/SLC>]:[CTAG];
ADD-SLK::[<MTP3 NA/Network Appearance>]-[<Linkset/APC>]-[<M2UA Link/SLC>]:[CTAG]::::M2UA;
CHG-SLK::[<MTP3 NA/Network Appearance>]-[<Linkset/APC>]-[<M2UA Link/SLC>]:[CTAG]::::M2UA:[CAGE=<int>],[IID=<int>],[OSC_FILTER=<Feature>],[DLINK_BANDWITH=<LinkBandwidth>],[ALARMS=<Feature>],[L2_DBG_LVL=<int>];
SET-SLK::[<MTP3 NA/Network Appearance>]-[<Linkset/APC>]-[<M2UA Link/SLC>]:[CTAG]:::[ACT/DEACT/SET_LPO/CLR_LPO/INH/UNINH/RESET]:M2UA;
VFY-SLK::[<MTP3 NA/Network Appearance>]-[<Linkset/APC>]-[<M2UA Link/SLC>]:[CTAG]::::M2UA::[<searchedAttrKey1=Value1>][,<searchedAttrKey2=Value2>]…[,<searchedAttrKeyN=ValueN>];
VFY-SLK-M2UA::[<MTP3 NA/Network Appearance>]-[<Linkset/APC>]-[<M2UA Link/SLC>]:[CTAG]::::::[<searchedAttrKey1=Value1>][,<searchedAttrKey2=Value2>]…[,<searchedAttrKeyN=ValueN>];
::[<MTP3 NA/Network Appearance>]-[<Linkset/APC>]-[<M2UA Link/SLC>]:<DRE_ID=int>,<CAGE=int>,<IID=int>,<L2_STATE=L2LinkState>,<L3_STATE=L3LinkState>,<CONGESTION_LVL=CongestionLevel>,<RXMSU=int>,<TXMSU=int>,<DIAG_MSG=string>,<OSC_FILTER=Feature>,<DLINK_BANDWITH=LinkBandwidth>,<ALARMS=Feature>,<USR_ACTIVATED=Feature>,<L2_DBG_LVL=int>;
::[<MTP3 NA/Network Appearance>]-[<Linkset/APC>]-[<M2UA Link/SLC>]:<DRE_ID=int>,<CAGE=int>,<IID=int>,<L2_STATE=L2LinkState>,<L3_STATE=L3LinkState>,<CONGESTION_LVL=CongestionLevel><RXMSU=int>,<TXMSU=int>,<DIAG_MSG=string>,<OSC_FILTER=Feature>,<DLINK_BANDWITH=LinkBandwidth>,<ALARMS=Feature>,<USR_ACTIVATED=Feature>,<L2_DBG_LVL=int>;
SLC - Position 1
Type: int(Range: [0..15])
Description: Signaling Link Code for this link. Value of 0-15
DLT-SLK::[<MTP3 NA/Network Appearance>]-[<Linkset/APC>]-[<M2PA Link/SLC>]:[CTAG];
ADD-SLK::[<MTP3 NA/Network Appearance>]-[<Linkset/APC>]-[<M2PA Link/SLC>]:[CTAG]::::M2PA:[DRE_ID=<int>];
CHG-SLK::[<MTP3 NA/Network Appearance>]-[<Linkset/APC>]-[<M2PA Link/SLC>]:[CTAG]::::M2PA:[LOCAL_IPADDR1=<string>],[LOCAL_IPADDR2=<string>],[LOCAL_PORT=<int>],[REMOTE_IPADDR1=<string>],[REMOTE_IPADDR2=<string>],[REMOTE_PORT=<int>],[M2PA_DLINK_BANDWITH=<int>],[M2PA_VERSION=<M2paDefaultVersion>],[ALARMS=<Feature>],[GR310_M2PAVLK=<Feature>],[DATA_DBG_LVL=<int>],[PROT_DBG_LVL=<int>],[SW_DBG_LVL=<int>],[SCTP_DBG_LVL=<int>],[TXABTL1=<Percent10to100>],[TXONSTL1=<Percent10to100>],[TXABTL2=<Percent10to100>],[TXONSTL2=<Percent10to100>],[TXABTL3=<Percent10to100>],[TXONSTL3=<Percent10to100>],[RXABT_BUSY=<int>],[RXONST_BUSY=<int>],[TXQSIZE=<int>],[LS_SCTP_VALUES=<YesNoState>],[HB=<Feature>],[HB_INV=<int>],[RTO_INIT=<int>],[RTO_MIN=<int>],[RTO_MAX=<int>],[MX_PATH_RETRANS=<int>],[MX_ASSOC_RETRANS=<int>],[BUNDLING=<Feature>],[BUNDLING_TO=<int>],[DELAYACK_TO=<int>],[FAST_RETRANS_TH=<int>],[SEND_INIT=<Feature>],[DSCP=<Dscp>];
SET-SLK::[<MTP3 NA/Network Appearance>]-[<Linkset/APC>]-[<M2PA Link/SLC>]:[CTAG]:::[ACT/DEACT/SET_LPO/CLR_LPO/INH/UNINH/SHUTDOWN/CONNECT/RESET]:M2PA;
VFY-SLK::[<MTP3 NA/Network Appearance>]-[<Linkset/APC>]-[<M2PA Link/SLC>]:[CTAG]::::M2PA::[<searchedAttrKey1=Value1>][,<searchedAttrKey2=Value2>]…[,<searchedAttrKeyN=ValueN>];
VFY-SLK-M2PA::[<MTP3 NA/Network Appearance>]-[<Linkset/APC>]-[<M2PA Link/SLC>]:[CTAG]::::::[<searchedAttrKey1=Value1>][,<searchedAttrKey2=Value2>]…[,<searchedAttrKeyN=ValueN>];
::[<MTP3 NA/Network Appearance>]-[<Linkset/APC>]-[<M2PA Link/SLC>]:<LINK_NAME=string>,<DRE_ID=int>,<LOCAL_IPADDR1=string>,<LOCAL_IPADDR2=string>,<LOCAL_PORT=int>,<REMOTE_IPADDR1=string>,<REMOTE_IPADDR2=string>,<REMOTE_PORT=int>,<L2_STATE=L2LinkState>,<L3_STATE=L3LinkState>,<CONGESTION_LVL=CongestionLevel>,<RXMSU=int>,<TXMSU=int>,<DIAG_MSG=string>,<M2PA_DLINK_BANDWITH=int>,<M2PA_VERSION=M2paDefaultVersion>,<ALARMS=Feature>,<USR_ACTIVATED=Feature>,<GR310_M2PAVLK=Feature>,<DATA_DBG_LVL=int>,<PROT_DBG_LVL=int>,<SW_DBG_LVL=int>,<SCTP_DBG_LVL=int>,<TXABTL1=Percent10to100>,<TXONSTL1=Percent10to100>,<TXABTL2=Percent10to100>,<TXONSTL2=Percent10to100>,<TXABTL3=Percent10to100>,<TXONSTL3=Percent10to100>,<RXABT_BUSY=int>,<RXONST_BUSY=int>,<TXQSIZE=int>,<LS_SCTP_VALUES=YesNoState>,<HB=Feature>,<HB_INV=int>,<RTO_INIT=int>,<RTO_MIN=int>,<RTO_MAX=int>,<MX_PATH_RETRANS=int>,<MX_ASSOC_RETRANS=int>,<BUNDLING=Feature>,<BUNDLING_TO=int>,<DELAYACK_TO=int>,<FAST_RETRANS_TH=int>,<CHECKSUM=SCTPCheckSum>,<SEND_INIT=Feature>,<DSCP=int>;
SLC - Position 1
Type: int(Range: [0..15])
Description: Signaling Link Code for this link. Value of 0-15.
DLT-SLK::[<MTP3 NA/Network Appearance>]-[<Linkset/APC>]-[<Generic Link/SLC>]:[CTAG];
ADD-SLK::[<MTP3 NA/Network Appearance>]-[<Linkset/APC>]-[<Generic Link/SLC>]:[CTAG]::::GENERIC:[LINK_TYPE=<genericLinkType>],[DRE_ID=<int>];
CHG-SLK::[<MTP3 NA/Network Appearance>]-[<Linkset/APC>]-[<Generic Link/SLC>]:[CTAG]::::GENERIC:[LOCAL_IPADDR1=<string>],[LOCAL_IPADDR2=<string>],[LOCAL_PORT=<int>],[REMOTE_IPADDR1=<string>],[REMOTE_IPADDR2=<string>],[REMOTE_PORT=<int>],[GENERIC_DL_BANDWITH=<int>],[ALARMS=<Feature>],[NETWORK_APPEARANCE=<NetworkApp>],[RC=<RContext>],[DATA_DBG_LVL=<int>],[SW_DBG_LVL=<int>],[SCTP_DBG_LVL=<int>],[LS_SCTP_VALUES=<YesNoState>],[HB=<Feature>],[HB_INV=<int>],[RTO_INIT=<int>],[RTO_MIN=<int>],[RTO_MAX=<int>],[MX_PATH_RETRANS=<int>],[MX_ASSOC_RETRANS=<int>],[BUNDLING=<Feature>],[BUNDLING_TO=<int>],[DELAYACK_TO=<int>],[FAST_RETRANS_TH=<int>],[INSTREAMS=<int>],[OUTSTREAMS=<int>][DSCP=<Dscp>],[TXABTL1=<TxQueuePercent>],[TXONSTL1=<TxQueuePercent>],[TXABTL2=<TxQueuePercent>],[TXONSTL2=<TxQueuePercent>],[TXABTL3=<TxQueuePercent>],[TXONSTL3=<TxQueuePercent>],[DISCARD_LVL=<MessageDiscard>],[REPORT_CONGESTION=<Feature>];
SET-SLK::[<MTP3 NA/Network Appearance>]-[<Linkset/APC>]-[<Generic Link/SLC>]:[CTAG]:::[ACT/DEACT/SHUTDOWN]:GENERIC;
VFY-SLK::[<MTP3 NA/Network Appearance>]-[<Linkset/APC>]-[<Generic Link/SLC>]:[CTAG]::::GENERIC::[<searchedAttrKey1=Value1>][,<searchedAttrKey2=Value2>]…[,<searchedAttrKeyN=ValueN>];
VFY-SLK-GENERIC::[<MTP3 NA/Network Appearance>]-[<Linkset/APC>]-[<Generic Link/SLC>]:[CTAG]::::::[<searchedAttrKey1=Value1>][,<searchedAttrKey2=Value2>]…[,<searchedAttrKeyN=ValueN>];
::[<MTP3 NA/Network Appearance>]-[<Linkset/APC>]-[<Generic Link/SLC>]:<LINK_TYPE=genericLinkType>,<DRE_ID=int>,<LOCAL_IPADDR1=string>,<LOCAL_IPADDR2=string>,<LOCAL_PORT=int>,<REMOTE_IPADDR1=string>,<REMOTE_IPADDR2=string>,<REMOTE_PORT=int>,<L2_STATE=L2LinkState>,<L3_STATE=L3LinkState>,<RXMSU=int>,<TXMSU=int>,<DIAG_MSG=string>,<GENERIC_DL_BANDWITH=int>,<ALARMS=Feature>,<USR_ACTIVATED=Feature>,<NETWORK_APPEARANCE=NetworkApp>,<RC=RContext>,<DATA_DBG_LVL=int>,<SW_DBG_LVL=int>,<SCTP_DBG_LVL=int>,<LS_SCTP_VALUES=YesNoState>,<HB=Feature>,<HB_INV=int>,<RTO_INIT=int>,<RTO_MIN=int>,<RTO_MAX=int>,<MX_PATH_RETRANS=int>,<MX_ASSOC_RETRANS=int>,<BUNDLING=Feature>,<BUNDLING_TO=int>,<DELAYACK_TO=int>,<FAST_RETRANS_TH=int>,<CHECKSUM=SCTPCheckSum>,<INSTREAMS=int>,<OUTSTREAMS=int>,<DSCP=int>,<TXABTL1=Percent10to100>, <TXONSTL1=Percent10to100>, <TXABTL2=Percent10to100>, <TXONSTL2=Percent10to100>, <TXABTL3=Percent10to100>, <TXONSTL3=Percent10to100>, <ASSOC_TXQSIZE=int>, <CONGESTION_LVL=CongestionLevel>, <DISCARD_LVL=Feature>, <REPORT_CONGESTION=Feature>;
SLC - Position 1
Type: int(Range: [0..15])
Description: Signaling Link Code for this link. Value of 0-15.
VFY-PCMAPS::[<MTP3 NA/Network Appearance>]:[CTAG];
::[<MTP3 NA/Network Appearance>]:<COUNT=int>;
COUNT - Count
Permissions: Read-only
Type: int
Description: Number of PC Mappings
DLT-PCMAP::[<MTP3 NA/Network Appearance>]-[<PC Mapping/PC Mapping Name>]:[CTAG];
ADD-PCMAP::[<MTP3 NA/Network Appearance>]-[<PC Mapping/PC Mapping Name>]:[CTAG];
VFY-PCMAP::[<MTP3 NA/Network Appearance>]-[<PC Mapping/PC Mapping Name>]:[CTAG];
::[<MTP3 NA/Network Appearance>]-[<PC Mapping/PC Mapping Name>]:<NAME=string>;
PC Mapping Name - Position 1
Type: string
Description: The name of the PC Mapping. This name is used to reference the PC Mapping from a linkset. It must be unique among the PC Mappings within the NA. It must consist of at most 32 alphanumeric characters, hyphens, and underscores
DLT-PCMAPREC::[<MTP3 NA/Network Appearance>]-[<PC Mapping/PC Mapping Name>]-[<PC Mapping Record/Direction>-<PC Mapping Record/Local PC>-<PC Mapping Record/Remote PC>]:[CTAG];
ADD-PCMAPREC::[<MTP3 NA/Network Appearance>]-[<PC Mapping/PC Mapping Name>]-[<PC Mapping Record/Direction>-<PC Mapping Record/Local PC>-<PC Mapping Record/Remote PC>]:[CTAG];
CHG-PCMAPREC::[<MTP3 NA/Network Appearance>]-[<PC Mapping/PC Mapping Name>]-[<PC Mapping Record/Direction>-<PC Mapping Record/Local PC>-<PC Mapping Record/Remote PC>]:[CTAG]:::::[DIR=<direction>],[LOCAL_PC=<string>],[RPC=<string>];
VFY-PCMAPREC::[<MTP3 NA/Network Appearance>]-[<PC Mapping/PC Mapping Name>]-[<PC Mapping Record/Direction>-<PC Mapping Record/Local PC>-<PC Mapping Record/Remote PC>]:[CTAG];
::[<MTP3 NA/Network Appearance>]-[<PC Mapping/PC Mapping Name>]-[<PC Mapping Record/Direction>-<PC Mapping Record/Local PC>-<PC Mapping Record/Remote PC>]:<DIR=direction>,<LOCAL_PC=string>,<RPC=string>;
Direction - Position 1
Type: direction={ANY,INCOMING,OUTGOING}
Description: Direction. Allowed values: ANY, INCOMING, and OUTGOING. Default value: ANY.
Local PC - Position 2
Type: string
Description: Local Point Code. A string representing a point code in the PC Display Format used by the Node. This represents the point code as understood by the local node.
Remote PC - Position 3
Type: string
Description: Remote Point Code. A string representing a point code in the PC Display Format used by the Node. This represents the point code as understood by the adjacent node.
DLT-MIGREC::[<MTP3 NA/Network Appearance>]-[<PC Mapping/PC Mapping Name>]-[<Migration Record/OPC>-<Migration Record/DPC>-<Migration Record/Message Category>]:[CTAG];
ADD-MIGREC::[<MTP3 NA/Network Appearance>]-[<PC Mapping/PC Mapping Name>]-[<Migration Record/OPC>-<Migration Record/DPC>-<Migration Record/Message Category>]:[CTAG]:::::[NEWDPC=<string>];
CHG-MIGREC::[<MTP3 NA/Network Appearance>]-[<PC Mapping/PC Mapping Name>]-[<Migration Record/OPC>-<Migration Record/DPC>-<Migration Record/Message Category>]:[CTAG]:::::[OPC=<string>],[DPC=<string>],[MSGCAT=<migrationRecMsgCat>],[NEWDPC=<string>];
VFY-MIGREC::[<MTP3 NA/Network Appearance>]-[<PC Mapping/PC Mapping Name>]-[<Migration Record/OPC>-<Migration Record/DPC>-<Migration Record/Message Category>]:[CTAG];
::[<MTP3 NA/Network Appearance>]-[<PC Mapping/PC Mapping Name>]-[<Migration Record/OPC>-<Migration Record/DPC>-<Migration Record/Message Category>]:<OPC=string>,<DPC=string>,<MSGCAT=migrationRecMsgCat>,<NEWDPC=string>;
OPC - Position 1
Type: string
Description: Originating Point Code. A string that represents a point code, in the PC Display Format used by the NA.
DPC - Position 2
Type: string
Description: Destination Point Code. A string that represents a point code, in the PC Display Format used by the NA.
Message Category - Position 3
Type: migrationRecMsgCat={AM Messages}
Description: Message Category. An identifier for the class of messages that are affected by this record. Currently there is only one allowed value: AM Messages (MTP3 Adjacent Management Messages).
Attribute Details
DLT-LOCALREDREC::[<MTP3 NA/Network Appearance>]-[<PC Mapping/PC Mapping Name>]-[<Local Redirect Record/DPC>-<Local Redirect Record/Message Category>]:[CTAG];
ADD-LOCALREDREC::[<MTP3 NA/Network Appearance>]-[<PC Mapping/PC Mapping Name>]-[<Local Redirect Record/DPC>-<Local Redirect Record/Message Category>]:[CTAG]:::::[NEWDPC=<string>],[MOD=<string>];
CHG-LOCALREDREC::[<MTP3 NA/Network Appearance>]-[<PC Mapping/PC Mapping Name>]-[<Local Redirect Record/DPC>-<Local Redirect Record/Message Category>]:[CTAG]:::::[DPC=<string>],[MSGCAT=<localRedirectRecMsgCat>],[NEWDPC=<string>],[MOD=<string>];
VFY-LOCALREDREC::[<MTP3 NA/Network Appearance>]-[<PC Mapping/PC Mapping Name>]-[<Local Redirect Record/DPC>-<Local Redirect Record/Message Category>]:[CTAG];
::[<MTP3 NA/Network Appearance>]-[<PC Mapping/PC Mapping Name>]-[<Local Redirect Record/DPC>-<Local Redirect Record/Message Category>]:<DPC=string>,<MSGCAT=localRedirectRecMsgCat>,<NEWDPC=string>,<MOD=string>;
DPC - Position 1
Type: string
Description: Destination Point Code. A string that represents a point code, in the PC Display Format used by the NA.
Message Category - Position 2
Type: localRedirectRecMsgCat={FCM,TFC,RCT,SSP,SSA,SST,SCCP Data,SCMG}
Description: Message Category. The class of message affected by the local redirect. The valid values are TFC, RCT, SSP, SSA, SST, SCCP Data, FCM, and SCMG. SCCP Data means SCCP messages other than SCMG messages (Called Party SSN is not 1). SCMG means any type of SCCP management message (e.g. SSA, SSP or SST). SST, SCMG and SCCP Data values may not be used with the Duplicate modifier. FCM means the flow control MTP management messages (TFC and RCT). Default value: FCM.