Use the Default ACL Statistics window to view default system access control list (ACL) rules and packet accept/discard statistics based on those rules. Refer to IP ACL Policing - Packet Filtering for more information on SBC access control lists.
On the SBC main screen, navigate to All > Address Context > IP Access Control List > Default ACL Statistics. The Default ACL Statistics window is displayed. Select default in the Address Context list. The Default ACL Statistics List is displayed.
Figure 1: Default ACL Statistics Window
The output includes the following parameters:
Table 1: Default ACL Statistics Parameters
| Parameter | Description |
|---|---|
| ACL ID | Identifier for the ACL rule |
| Protocol | Protocol associated with the rule |
| Application | Application associated with the rule |
| Address Context ID | Address context ID |
| Lif Grp ID | LIF group ID |
| Source IP Address | Source IP address associated with the rule |
| Destination IP Address | Destination IP address associated with the rule |
| Policing Mode | Policing mode |
| Bucket Size | Policer bucket size, in packets |
| Credit Rate | Packet rate allowed, in pps (fill rate) |
| Pol ID | Policer ID |
| Pol Priority | Aggregate Policer priority |
| Packet Accept | Number of packets accepted |
| Packet Discard | Number of packets discarded by the policer |
| Agg Pol | Name of aggregate policer |
| Owner | Name of application which created the rule |
Overview
Content Tools