This procedure maps the network interfaces in the initial setup on the SBC SWe Lite. The Cloud-init function provides an alternative method to running Initial Setup on the SBC SWe Lite. For details on using Cloud-init, refer to Using Cloud-init to run the Initial Setup on SBC SWe Lite.
You do not need to perform this procedure if you use the cloud-init function.
To assign a virtual NIC to a physical network adaptor, refer to the respective third-party documentation:
KVM Hypervisor: http://www.linux-kvm.org/page/HOWTO
Microsoft Hyper-V: https://technet.microsoft.com/en-us/library/mt169373(v=ws.11).aspx
VMware ESXi: https://www.vmware.com/support/pubs/
Microsoft Azure: Deploying an SBC SWe Lite via Azure Marketplace
Log in as user netconfig
with password as Config!
. Change the password when prompted.
Choose DHCP or enter a static IP address.
For SBC SWe Lite deployment in Azure, Microsoft does not recommend assigning static IP address on the SBC SWe Lite's Ethernet port; you must configure the SBC SWe Lite's ethernet port to use DHCP.
Would you like to configure a static IP address for Initial Setup on the Admin interface? This is only required if DHCP is unavailable (y/[n]): n
Enter the interface name to map the interface as shown in the WebUI when prompted by the interface mapping shell script.
The interface mapping shell script requests that the user provide the interface name to map the interface as shown in the WebUI.
Use the MAC address (identified in the virtual machine editing portion during Installing SBC SWe Lite on your specific platform) in order to correctly map the interface. The interface name and MAC address are required to properly activate the interface and have it appear on the WebUI.
mgt0
.Enter an Ethernet 1 Media interface name. Example: pkt0
.
Enter each subsequent Ethernet Media interface Name, and then apply the changes.