In this section:
Note
This object is visible and configurable only for distributed SBC SWe deployments.
Note
Beginning in release 8.0, Load Balancing Service configuration applies only to media SBC (M-SBC) clusters in distributed SBC SWe deployments. The M-SBC load balancing distributes media requests among nodes. Load balancing of REGISTER or INVITE requests through retargeting is no longer supported and should not be configured.
Distributed SBC SWe deployments support configuring a Load Balancing Service (LBS) to distribute media requests among M-SBC nodes in a cluster.
To configure an LBS on a PKT port (any IP Interface other than MGMT), set the Cluster Comm Type to IP before the LBS configuration on an M-SBC. Refer to Cluster Admin - Cluster Comm and Intra-Cluster VNFC Communication Using Packet Ports.
Configuring a Load Balance Service
On the navigation pane:
click All > System > Load Balancing Service.
Use the following table to edit the configurations and click Save.
Parameter Descriptions
Table 1: Parameter Descriptions
| Parameter | Description |
|---|---|
| Group Name | Domain name of the load balancing group. |
| Private IP Interface Group Name | The name of the private IP Interface Group to use to communicate among nodes in an M-SBC or T-SBC deployment. |
Invite Retarget Mode | This configuration applies to a feature that is no longer supported and the configuration is no longer required. |
Register Retarget Mode | This configuration applies to a feature that is no longer supported and the configuration is no longer required. |
Overview
Content Tools