You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Current »

Back to Table of Contents

Back to All

Back to All - Alarms

This section contains commands to clear the Current and History alarms.

On the SBC Main Screen, go to All > Alarms > Clear. The Clear Commands window is displayed.

Alarms - Clear

The Clear Command clears the following alarms:

  • Current
  • History

To Clear Current Alarms:

  1. Choose Current from the Commands drop-down box.

  2. Click Select. A pop-up window is displayed seeking your confirmation.

    Usually, the Alarm ID field consists of values. However, if the Alarm ID is empty, SBC EMA still proceeds to clear all the Current Alarms listed in it.

    Alarms - Clear - Current Command

  3. Click current to proceed with clearing all the current alarms displayed. The result of the action is displayed.

    Alarms - Clear - Current - Command Result

  4. Click OK to exit.

To Clear History Alarms:

  1. Choose History from the Commands drop-down box.

  2. Click Select. A pop-up window is displayed seeking your confirmation.

    Alarms - Clear - History Command

  3. Click history to proceed with clearing all the history alarms displayed. The result of the action is displayed.

    Alarms - Clear - History - Command Result

  4. Click OK to exit.

Once the alarms are cleared, there is no way to retain them.

 

  • No labels