DO NOT SHARE THESE DOCS WITH CUSTOMERS!
This is an LA release that will only be provided to a select number of PLM-sanctioned customers (PDFs only). Contact PLM for details.
The SBC sends Device Watchdog Requests based on the configured Device Watchdog Timer
value. Device Watchdog Timer
is started once the transport connection towards a Diameter Peer is established. It is reset whenever any Diameter Message is received from the Diameter Peer. It can be a Device Watchdog Answer, some other Diameter Base Protocol Message, or any message from any of the Diameter Application (for example, Rx interface AAA messages).
set addressContext default diamNode rxNode primaryOriginHost <SBC.primary.origin.host> secondaryOriginHost <SBC.secondary.origin.host> ipInterfaceGroupName <Ip.InterfaceGroup.Name> ipV4Address <diamNode.IPV4.Address> ipV6Address <diamNode.IPV4.Address> originRealm <SBC.origin.realm> transactionTimeout 6000 set addressContext default diamNode rxNode state enabled set addressContext default diamNode rxNode peer <Diam.Peer.Name> ipAddress <Diam.Peer.IpAddress> tcpPort <Diam.Peer.Port> fqdn <Peer.Fqdn> set addressContext default diamNode rxNode peer <Diam.Peer.Name> deviceWatchdogTimer 1000 set addressContext default diamNode rxNode peer <Diam.Peer.Name> deviceWatchdogTimerAnswerTimeout 2000 set addressContext default diamNode rxNode peer <Diam.Peer.Name> state enabled set addressContext default diamNode rxNode realmRoute <Pcrf.realm.RouteName> realm <Pcrf.realm.Name> peer <Diam.Peer.Name> appId rx priority 0 set addressContext default diamNode rxNode realmRoute <Pcrf.realm.RouteName> state enabled set addressContext default staticRoute <Diam.Peer.IpAddress> <Subnet.Mask> <Defaul.Gateway> <Ip.InterfaceGroup.Name> <Ip.Interface> preference 100 commit