Use this section to view or edit the local ring back tone.
To View and Edit Local Ring Back Tone
On the SBC main screen, go to Configuration > Profile Management > Category: Media Profiles > Tone And Announcement Profile > Local Ring Back Tone.
Select the desired Tone And Announcement Profile from the drop-down list to view its respective Local Ring Back Tone parameters.
The Local Ring Back Tone window is displayed.
Profile Management - Media Profiles - Local Ring Back Tone
The following fields are displayed:
Local Ring Back Tone Parameters
Parameter | Description |
---|
Signaling Tone Package State | Specifies the administrative state of the Announcement Package: |
Signaling Tone Package | Specifies the signaling tone package to be used for calls over the associated ingress and/or egress trunk group. |
Precedence | When both the ingress and egress trunk groups have a local ring back tone associated with them, SBC uses this setting to determine which one to use. The options are: |
Make Inband Tone Available | If enabled, it will insert an in-band tone indicator (OBCI in the case of ISUP) in a backward message (for example, ACM) when playing local ring back. The options are: NOTE: You must enable makeInbandToneAvailable in order to use LRBT.
|
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.
Additional topics: